| Thread | Last Post | Replies |
|
| 1995 Disco series 1 fuel leak | 05 Dec 2006 01:01 GMT | 6 |
Hello all. The wife's '95 Discovery series 1 has sprung an intermittant fuel leak. She told me it was leaking when she topped off her fuel tank today. I thought filler hoses -- I checked back up there, and sure enough it looks like one or two of the hoses are
|
| What is under the bonnet | 04 Dec 2006 22:20 GMT | 12 |
Is there any really simple quick way of seeing whether a Defender has a 200Tdi or a 300Tdi fitted? Better still, is there anything obvious to a total amateur that shows that it is a Defender rather than a replacement from a Disco that is in there?
|
| Thread sizes 89 RR ? | 04 Dec 2006 20:39 GMT | 2 |
How do I figure out what thread a particular bolt is ? For example, the rear bumper captive nuts look like metric ( coarse thread ) but metric bolts don't fit. I could buy a thread gauge but I thought only UNF and metric were used.
|
| Is it a bad thing that i drempt my clutch went? | 04 Dec 2006 19:55 GMT | 3 |
Strange dream last night - dreampt the clutch went for some reason! Must have been eating cheese... This has got me thinking. The clutch on my 90 is not stiff, but heavier than i think it should be. My local LR garage drove it a while back and
|
| I got stuck tonight.... | 04 Dec 2006 19:54 GMT | 21 |
Well ever so ever so nearly... Was driving home from work, on a dual carriageway with no hard shoulder. Mobile rings - To be on the safe side, i thought id pull over and answer it. Pulled off the road, onto the grass at the side.
|
| Panorama last night | 04 Dec 2006 18:31 GMT | 4 |
Anyone see Panorama last night with the Royal Marines thundering about in Afghanistan in what looked like two rather nice LWB Hi Caps and something bigger and more Continental?
|
| Power Steering Box Seal | 04 Dec 2006 16:44 GMT | 10 |
Has anyone any experience of changing the seal on the column input of the PAS box on a Disco? Mine is leaking and I have ordered a seal kit from Beam-ends but no idea what sort of job it will be to fit. Thanks in advance
|
| 110 Gearbox - still difficult changing | 04 Dec 2006 12:47 GMT | 1 |
1990 110 CSW 2.5TD LT77 gearbox Thanks for the recent suggestions. I have now changed the oil (old oil was dirty no major "bits" in it) and it has made a minor difference, but third is still difficult to get
|
| Engine Noise V6, Whining Noise when hot | 04 Dec 2006 11:55 GMT | 4 |
I have a 2002 Freelander w/51000 mi on it. I just had the Radiatator recovery / oveflow container replaced and a new noise has shown up, When the car warms up to opertating temp a whining noise starts from the left side of the engine.
|
| Head Gasket.....Which one????? | 04 Dec 2006 10:18 GMT | 6 |
Trying to get my 1996 300Tdi Defender with 114000 miles up and running after I drowned her. Down to the last knockings and don't have a head gasket They come in three different thicknesses and I don't have the old gasket
|
| Pinging Austin | 04 Dec 2006 09:24 GMT | 11 |
Hi Austin, Have you spotted this for your Colchester crosslide. 270061389008 Regards. Ben
|
| http://www.thecarparty.org.uk/ | 04 Dec 2006 01:48 GMT | 35 |
http://www.thecarparty.org.uk/ says it all really, found the link on the uk.rec.cars.4x4 group. Lee D
|
| TD5 Gearbox replacement | 04 Dec 2006 01:12 GMT | 3 |
Can anybody recommend a replacement gearbox for a disco TD5 that will last. I do a lot of towing (2200kg+) and the first box went after 150 000km. I am now on 250 000km and wondering when the next one is going to give up. Would also like to know if anybody has found a worth
|
| Stolen 110 - North Lincolnshire | 03 Dec 2006 11:31 GMT | 3 |
Not mine.. posted on from MCUK Details follow:- My 1985 V8 110 was stolen overnight from North Lincolnshire, I expect it will now be broken up.
|
| More motoring humour | 03 Dec 2006 11:00 GMT | 2 |
http://www.funtoosh.com/dj.php?details=A11~362 Steve
|