Have a ARP 3.5 Litre block with a webber carb on it and a high lift cam.
Took it in for an MOT and it failed due to emissions. I asked them what they
would do  to cure the problem they said tune the carbs.  As this has a
webber on, which is not really tunable with out installing ...

Hi Richard,
Fitting the new Disco 300TDi overhead mirror has beaten the local garage
too, have you any idea how to get the old one off?
Ta

Does anybody have any idea what the thread on the 101 oil pressure
switch is and what the thread on the end of the oil take off pipe for
the compressor oil feed is?
(ive removed my compressor so dont need the oil feed)

This is largely hypothetical, but...
Stig is a '58 and therefore has no legal requirement to have seat belts
fitted (and indeed doesn't). It is therefore impossible for me to fit an
appropriate car seat for Charlotte (aged 3) to sit in.

Anyone know about Thermostart plugs? (not thermostat!!!)
I want to install a Thermostart plug in my big Ford powered diesel
generator as it has no glow plugs and although starts ok with the
'excess fuel' button pressed I'm trying to avoid the big black

The driver's (electric,non-memory) seat base moves happily back and
forth, up and down.   Things become interesting when altering the lean
angle of the back.  From upright it reclines evenly on both sides for
about 3 or 4 inches (distance travelled by top of seat back), whereupon ...

I am a very proud, new owner of a '72 Lightweight, petrol 24v.  Huzzah.
Only problem is I'm just learning how much car stuff I don't know, so
I will apologise once in advance for the flood to come :)
She's just back from the fixers after an interesting electrical saga,

I need to do some chassis repairs to my Series 2 ( a little Christmas
project!!), I want to get everything together before the break as everyone
will be shut no doubt.
I need to get some steel to do the repairs, what thickness do you suggest

Friend of mine has an RRC chassis to dispose of. Is it worth anything ?
Steve

Can anyone help with what to replace the nylon rollers with?  I live in
Australia and have seen after market aliminium rollers overseas.  I am
thinking a bearing or similar.  I did see a quick fix solution on a land
rover site some time ago but can't remember where.  The Td5 is a ...

The one on my 1989 T/D 90 has I think gone awol. It only starts if I turn on
the switch, get out and nudge the blade - after which it works ok until I
next try to switch it on.
I suspect I need a new motor but they seem to cost an arm and a leg so I

I've just bought a 89 RR, which has turned out to have no thermstat
fitted (hopefully this explains the heaters reluctance to work!).
I've got a cheapo 'stat from the local parts place but it has no
'jiggle pin'. As getting parts here in the Channel Islands can mean a

I own a 2002 Defender 110 CSW. I would like to know if the chasis is
galvanised or are they no longer produced like that?
Thanks

I have been meaning to take a picture since i did my respray back when
it was still nice and hot, but today has been the first chance ive had
to get a picture of it when it has not been raining and since i
finally refitted all the lights and stuff and tidied the wheels up. :)

http://news.bbc.co.uk/1/hi/england/bristol/6168711.stm
Stuart