Hi all and a Happy New Year (don't think I have been on since
December!)
I was inspecting my door bottoms today (my 1988 110 CSW is fitted with
those special 'invisible' ones with the rust coloured edges).

Can't think of a better informed group to ask:
My little Bosch router is driving me nuts: recently, the plunge part has
started jamming up at crucial moments (i.e. whenever I try to plunge
it). I've cleaned the slides and used fresh engine oil on them (steel

I have a 1988 Classic with a set of 4 identical locks.  I also have a
1990 Classic with two different locks - the steering lock matches the
tailgate and the door(s) are different.  I say door(s) because I haven't
checked that the door locks are a pair!

We bat around ideas about whether or not to fit them (I'm  convert btw) if
you are erring they are going cheap at Netto shortly.If the £2 stop light
are actually stop n tail light our local Netto will be sold out when I get
to the checkout

Is this a known problem with this model? I have not had it long
but I've found water pouring down from the roof-lining and down
the rear-view mirror onto the dashboard and the radio, - and also
pouring down the inside of the tailgate door. It seems as if the

High Priestess of Rambling is in trouble ...
http://news.bbc.co.uk/1/hi/entertainment/6270055.stm
Fnarr.

Anyone any ideas?
The alarm kept going off in the car park at work today.  I went out and shut
it up, then checked all the doors and windows - nothing open or unusual, no
wild animals in the inside.  Never happened before.  When I came to lock it

Can anyone supply me with or direct me to a source for blueprint drawings of
this vehicle? It is for a project in 3DMax, I have all the chassis
dimensions, but also require all dimensions for the body.
Richard

old paint on the engine was light blue , does this signifiy anything ?
and what paint should i use and where do i get it from??
thanks in advance
paul

I  (finally) decided I need a brake pipe bender - some tight bends I don't
think I can do with my unvicelike fingers so this looks like the thing
http://www2.westfalia.net/medien/scaled_pix/250/180/000/000/000/000/000/009/15.jpg
however I was kidnapped by the Snapon bloke while ...

Only went and passed his MOT without even so much as an advisory!

I'm stunned!
Headlights and Powersteering pump seem to have paid off along with getting

I'm planning to exchange the old and tired LT95 gearbox of my RRC with a
R380 (short stick 5 speed) with LT230 transfer box.
The set I want to buy is still in a car , so I can make a test drive to
check if it's OK.

Having been walking to school to collect the kids for the last few weeks,
I've just driven to get the kids in the 4x4 because for the last 2 days it's
been freezing on the playground waiting for them to come out.
I was hoping the use of the 4x4 would warm things up but alas not. ...

RR 2002, had a brake pad warning came up and the "eba" lamp went from
amber to red at about the same time. Have changed the front pads and
also had to change the "pad" sensor due to damage. However the eba lamp
still remains on red. Anybody have any ideas what may have happened?