Anyone know of any of the above sites? Thanks.....

There is a transmitter (I think, it looks like one) fitted in my servo
assembly (the big, black round thing that has something to do with the
brakes). There can be fitted two wires on the transmitter (there's
nothing now). Can anyone tell me what that transmitter is for and where ...

Any tips and tricks on how to replace the top dash of 1976 RR? I've been
trying for two days now, without any luck... although I didn't break
anything trying, you might call that luck!
Kind regards, Hans de Ruiter

OK anyone watch the show tonight? I have three Estes rockets ready to go,
what do ya think. 3 rockets duct taped onto Edie, mi Disco? How high? LOL

I'm not used to driving diesels discos, but my new '96 300tdi seems more
sluggish than it should be, particularly when picking up speed between
30mph-50mph. Makes a lot of noise but accellerates slowly. It's an
automatic. I sort of expect a turbo pick-up around that speed when I ...

Quick question that I hope someone here knows the answer...
I've a Freelander petrol and this morning after being parked for a week the
battery is dead.  It's on charge at present but for the last few weeks
whenever I've got into the car there has been two chimes and the seatbelt

After my recent post looking for some wheels, I've been offered 5
wheels, but I think they are RR wheels and thus not suitable for my
110 (weight capacity ??) Also not sure of rim size, (I need 16 x 5)
although the lister who has offered them gave me some sizes:-

After being nagged rather a lot, we're doing mail order again.
This is aimed mostly at those who don't have a "local" dealer
and can't get stuff elsewhere - it's a service rather than core
operation. The site explains things.

Could do with replacing brake discs/pads on a 300TDI disco1, non vented,
non abs before the MOT in May.
1) Can I fit vented discs and still use the same calipers?
2) If not, what are the best options for maximizing the stopping power

Just about to have a go at sorting out an annoying leak next to
cylinder 4 from a rather tired  manifold gasket. I know how the inlet
manifold comes off and  I can just about see where the outlet manifold
bolts are. Can anyone  tell me if I slip in a new gasket by just

Hi all, my wife rang me all in a panic. She had half a tank in her 90 Td5
and mistakenly put just under14 ltrs unleaded in it. Realising her mistake
she then brimmed it with Diesel.
That would make about 3 gallons of petrol in about a 20 gallon? tank.

i've got to get one like this.
http://cgi.ebay.com/ebaymotors/X-Rare-1979-Land-Rover-Range-Rover-Factory-Conver
tible_W0QQitemZ200080005083QQihZ010QQcategoryZ6295QQssPageNameZWDVWQQrdZ1QQcmdZV
iewItem

Always a sucker for a bargain on eBay I have picked up the detachable
towball stowage fitting for the Disco 3.  This is supposed to go behind the
left hand panel in the luggage area and is an 'easy fit'.  The bracket on
the fitting has two large holes and there are two equally large ...

You recently signed a petition asking the Prime Minister to
    "force all ramblers/walkers to wave a red flag when walking on
    a "public road"."
    The Prime Minister's Office has responded to that petition and

OK, so the user handbook for my Defender TD5 says change the auxillary
belt at 96000 miles but only shows pics of the 300Tdi and the V8.
What is the best way to change the belt?  Where is the tensioner?
David