Hiya all,
Does anyone know where I can get a FULL wiring diagram for the factory
alarm on a 94 RRC? (part number AMR 2106
I presume there is a cutout on one of the 2 multipins cos I remove the box

Before I even waste my time going to look.
http://smallr.com/211
Is the "radiator" light a common problem?
Or is some bull to sell to those who don't know where to ask about such

Got some Scorpion 255 55 18's on at the minute, ones bald, ones got a
nail in the sidewall & three are in new condition. It's gonna cost me
£250-£300 for 2 new Scorpions. The bloke at Kwik fit has a full set of
255 60 18 Good Year in stock for £200 for all five. Any problems if i ...

OK, I've tampered and the book says it is Factory adj. Mr Haynes is not helpful hear.
Question; what is the correct method to adjust the 'idle adj in the plenum chamber'.
Currently I have the Allen Screw 5 turns out.
I assume it is a compromise to work with the 'Air Bypass Valve'

Whats the cheapest way to replace the mats in a Defender?
Any one used stable mats?
Gerald

Heads up collecting types I went into Poundland looking for a card reader
and came out with a nicely detailed model car (I may get round to growing up
in another 50 odd years) very detailed door mirrors separate exhaust system
even got a transmission brake on the diff and ...

I tried on numerous occasions to sign the road pricing petition before it
ended - on two different computers.
Never received the confirmation Email.
Is this a common problem?

So my rear suspension has gone on teacakes again.  Last time it was after a
tyre change when (after having all 4 lifted off the ground at the same time)
the rear SLS dropped to the floor and the Disco bumped along like a dog with
an itchy bum.  It was under warranty from an ...

I need to sell my 90 (V8 auto) but havent got a clue how much its worth.
Pics here if anyone can give me an idea:
www.richardsrovers.co.uk
Thanks

Rainy day jobs:
Fixed the front wiper motor self-park function. Easy job to open up the
unit, clean everything and pre-load the contacts then box up with
8ba-ish nuts and screws after a bit of modification. Didn't have to use

Ambulance bodied 101 modified for TV series!
<http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=320085379822&ssPageNam
e=STRK:MEWA:IT&ih=011>

I'm thinking of buying a Defender with a 2 inch suspension lift and
gas shocks, mainly for towing a horse trailer.  When I mention the
suspension mods to insurance companies (Sureterm, Lancaster) they say
they won't touch anything with a suspension lift, and it is dangerous

Evening
Went to the girlfriends parents this afternoon, and when we left there
was that oily shite in the rain water all over the drive..
Got home and investigated, and it turns out that the nut on the fuel

Looks like I will be needing a new valve block for the Disco.  I've been
searching the interweb, but can't find one for sale - CraPaddocks, Famous
Four etc - all have them for the P38, and the D2 ACE valve blocks, but
nothing for the D2 SLS.  Apparently it's a simple job, if I ...

I know it's considered bad form to use this as a small ads site, but I
hope you'll forgive; after a family conference this afternoon, we've
come to the conclusion that Veggie, our beloved 110 CSW, has to find a
new home.