Sadly the 300 TDi ES has gone to a good home. Doing 20,000 plus miles a year
meant a more economical vehicle than the 28mpg LR was called for. My Picasso
is only 9 inches shorter, 6 inches narrower and actually has a longer
wheelbase than the Disco. Won't be so good in the snow ...

About to put new sparkplugs on a RR Classic 3.9 Catalyst for the first time.
I've got the Emmegas single-point LPG system and wondered what sparkplugs
you'd advise and if I need to change the plug gap to work better with the
LPG system. Would you also advise a certain brand of HT ...

Hi , just been looking on your site for bits for S2 hinges and was
after a bit more info before/if I order.
Could you please tell me what this comprises 330953/7    Door Hinge Kit -
Series II/Series & Defender Rear Door.

I've just tried to register on http://www.landroveraddict.com/smf/ in an
attempt to help some guys out with paint problems, but after half an
hour trying to get past the registration I gave up the performance.
What's worse is there doesn't appear to be a way to email them unless

Chaps,
I need some special bit/socket to get the 10 head bolts loosened on my
Freelander. It's clearly not an ordinary socket, maybe some type of
torx but Im not too sure.

I was impressed to see a 1957 Landy diesel go for £8600 on eBay today
(item 230130522022). It looks like an excellent vehicle, but I didn't
realise prices had reached that sort of level.
Steve (Cheshire)

Toying with new tyres on the 110 before our trip across France and Spain
Often hear comments about tyre availability (We currently run 235/85 and
need the same rolling radius) being better on 15 inch rims.
What is the equivalent tyre size for similar rolling radius for a 15 inch

Im looking to purchase one to pull a horse trailor with 2 horses weighing
over a ton + trailor weight. I had a disco but it struggled so I want a V8.
Ive looked across the net and found a black J reg for 5k. But missed it and
it sold elsewhere.

I thought I would add this post to share info with anyone else with the same
problem.
My 1997 2.5 DSE Range Rover P38 failed to start one morning.  The engine
turned over well, some smoke and unburned fuel could be seen/smelled at the

anyone got a printer that uses an HP 339 cartridge?
I've got a spare one here (opened but unused), which it turns out doesn't
fit mine.  Or at least, it fits, but the machine complains about it.
some machines are listed as taking both 338 and 339, but apparently mine

With the billet adapter can you get 18"/19" Disco2 / P38 alloys to fit
without rub? Or do you need a suspention lift?
Dont want to go extreme off road. Just horsebox off-roading at most.
Anyone done it? Pictures?

Maybe OT maybe not, but it is interesting to follow the debate following the
fire with the Cutty Sark, as to how much you can replace and it still be the
same thing.
An argument familiar to many of us I would think, when my chassis is a mass

Anyone got a recommendation for a lightweight trolley jack.  I intend
keeping it in the boot to use instead of the bottle!!
Ta

I have a "rubber duck" version on the front wing and from time to time all
seems well and then I go through a phase of either poor or virtually no
reception - recently fitting a new radio (fancy with Bluetooth 'phone
connection ability!) I lost all am/lw signals and only after ...

I have downloaded a copy of testbook, but adobe says I need more components,
but dont say which. I cant view pdf's.
What else does this software do?
Regards