My RRC with a Vogue body circa 1986 came with an alarm unit operated by a
single button squarish key fob marked Land Rover. There is a sensor at the
top of each A-pillar inside and it has a siren unit bolted to the offside
wheelarch under the bonnet. This has a large bunch of ...

I've got a few bits of welding to do in the near future so I fancy making up
a folder/bender/brake call it what you will, got a couple of sets of plans
but I'm sketchy on the hingeing arrangement ideally I should build one so I
can fabricate complete sills  ( so thats the ready ...

Fed up with this LR (summat every day)
Now mi wipers park where they want as I switch them off
intermittent is no more,
just keeps wiping.

Just changed the battery in my remote key fob (Discovery TD 5, 03 plate)
Still doesnt work.  The old battery was definatley flat.  Does it need re
programming or am I missing something?  Manual says just put a new battery
in and it should work??!!

I have a 300Tdi head which is seriously warped. Combine this with a
cylinder block which has had new liners installed and the top skimmed.
Can any one advise how much you can really skim off the head? The
manuals say you shouldn't do it. .................

I had a new Defender in today for some bits and bobs.
I had to collect and deliver to the main dealer and I must admit that it
was a lot better than I thought it was going to be.
It had noticeably more torque than a standard Td5 and not too far off my

Can anybody recommend a reputable and reasonably priced source for a
replacement steering box for a 1998 Discovery 2 RHD?
Bryan.

New kind of thread?
I have a brand new front grill for the RRC, later type plastic thingy.
I have a spare wheel cover for a Disco or Defender too.
Any takers?

Tornado over our house last night, fortunately the funnel didn't touch down.
Looks like peeps in Sheffield are having it rough. The commentary of one
chap on the news "It's getting pretty critical now, the power has gone
off..." Though to be fair the tremor in his voice depicted a ...

Anyone know what the present cost of welding is?
Ta very much.

nope nothing to do with MacEnroe I got Emailshotted by Landrover as if I
would buy a Rangie on the strength of this
http://www.landrover.co.uk/Microsites/UKRRSProspective/index.htm?campaignid=LRS0
607DM_Q2A2&advertiserid=em0607&bannerid=10
even if I had any space on the drive ...

Finally getting a bit of time to work on my
90. Next accessory (Necessity!) that I'd like
to fit is a snorkel. Looking at the weather
outside at the moment I would say I need to

Just for a change Netto are on the discount air tools trail including a
2 hp 50 litre compressor and other stuff
http://www.netto.co.uk/internet/nettog/catalogue/catalogue.nsf/webActiveCatalogu
ePages/1-6?OpenDocument&catid=1
( bet the link goes titsup )

Morning
With Project Garden Decking looming nearer, id like to get hold of a
pair of roof bars for the 90, Just to i can lay timber etc on top of it.
Anyone know of where i can get some from, or does anyone have any they

Just got back from a great morning's off-roading on a 60 hectare site
near here covered in lanes, rivers, mud and rocks!
Great fun - tho myself and a friend turned up in our Disco's with
standard tyres, only to be told no chance would we be going anywhere