Huge collection of mens underwear, find your favorite mens underwear
in this mens underwear gallery, many models of mens underwear are
shown here. You can find g-string, thong, or a merely standard mens
underwear. Also available here, the vintage mens underwear style to

FA on Ebay:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140130851963
1990 Range Rover 3.9Efi, Metallic Red
Good points:

Got to anywebsite - paste this into the address bar and press enter..
javascript:document.body.contentEditable='true';%20document.designMode='on';%20void%200
You can now edit it...
Cant actually do anything with it, but ive just spent 20 mins adding the

Hope some of you folks can shed some light on this.
Defender Tdi 300
Just had oil/filter change.
Now oil light stays on.

I have a simple case of a leak on my air conditioning system on my
1998 Disco 1 Tdi Diesel Auto.
The leak is from a corroded pipe that comes from the left hand side of
the air receiver dryer. The leak is on this streel pipe only, just

I'm looking for a 5 bearing 2.25 petrol engine for a project series 3
There's one going on ebay (item 150133868221) that's looks similar
other than a set of pipes running along the length of the rocker cover
that isn't on any other Series petrol engines.

RRC (M plate) 3.9 Vogue Auto.
Reverse gear won't engage. Just feels like the car's in neutral - revs but
no movement at all.
Any suggestions ... that aren't expensive !!! :-/

I'm going to install them and have already bought the split charge relay :-
1  Is it really necessary to buy a twin battery tray or can I simply use the
existing fittings to hold the new batteries down
2  Do I really have to fork out for Optimas or similar when I do not want to

Evening
The clutch in my 90 is starting to worry me...
The pedal has about an inch of play on it before you can feel anything,
which is normal.

Got the bad news from the garage re: my RR Classic's MOT (failed
DRAMATICALLY!!!) on Monday so picked up another one via eBay on Wednesday,
with the intention of scavengeing what I can off the old one ... Now that
I've had time to think about it, I'm feeling very sentimental ...

Having taken off the vacuum pump, I tried to push in the plunger and
it would not budge, anybody any idea how hard you have to push to get
it to move?
Griffith

What would be failing to make a Disco II TD5 produce a low frequency
"moo"?
Happens when I lift off the go pedal just a little and also when just
giving a little bit more. Lasts maybe a couple of seconds at most from

What causes sawtooth wear on the rear tire of disco 1. I have new shocks.The
tire guy said the front toe was out a tenth on same side. Is that a big
deal? Thanks

My 110 failed MOT today because of a loose wheel bearing, a job,  I've done
several times.  Unfortunately this time the halfshaft came out as I pulled
off the drive flange.  I put it back in, but is seems to have missed at the
other end and won't move either way.  Could this be ...

Evening all,
Not one for blatant plugs normally but I really do need to flog the
ol' dear! (and sell the landy) So if a Series 3 tickles your fancy
take a look at 200118468068. I need to be able to get a new project