Hi, all.
As per subject, really.
Disco3, 06 plate.
V6 diesel, auto.

Send me a mail with yer addy on matey, I'll send those pics i forgot
about!
What size tyres are the ones on your D1?? Have you done any cutting or
lifting?

My indicators have stopped working, but, the hazard warning flashers are
OK1 I have changed the flasher relay module as I thought it may have
been sticking, but no joy. Could it be a dodgy earth somewhere? All help
appreciated.

Got a new gear and transfer box for the 110.
R380
Please be honest, is it an easy job to change over.
No pit,  but jacks, & axle stands yes.

I have a 1996 (N REG) Discovery TDI, bought in 2006 and has now done
127K+ miles.
Handled fine when I got it but started to experience wheel wobble and
swaying at higher speeds, with the speed at which the problem occurs

I have purchased a gasket pack for a Defender 300Tdi and within it
there are numerous small copper washers. When I took the engine apart
I did not come across any of these copper washers and the workshop
manual does not mention any of them, can anybody advise what the heck

I've lost the link to the site that has the parts catalogues and
manuals.  Currently trying to get my head round how to fit the EFi
system into burrt and what I need to salvage from the donor rangie.
Can someoine post a link to it please?

Greetings all,
Am currently looking at a Y plate TD5.  Money has yet to change hands, but
the test drive went ok before i went on holiday.  Arrived home from holiday
to find dad in a panic.  Said Disco had been left on our drive and it had

Have tracked down vibration on my 1988 110 as the output bearing in
the transfer box for the front propshaft (have checked the flange nut
and it is tight, and there is definite up/down play). Anyone know if
you can replace the bearing without having to remove the whole box ?

Paypal have pissed me off...
I travel around the uk a lot, and happened to be in Glasgow on Wednesday
I checked my paypal account from a customers computer, with no
unsuccessfully logins.

Possible? What needs to be done?

Got an NIP for the other weekend, I was going up a hill towing a very
large caravan with my Land Rover auto box overheating. I was limping at
the side of the road with cars overtaking me.
I was doing no more than 20mph ffs, even the wife says the same. I'm no

http://news.bbc.co.uk/1/hi/uk/6938131.stm
--------------------
A Briton living in New Zealand in an old car, with a pet possum, has
denied he is missing aristocrat Lord Lucan.

I have assembled an item using Threadlock only to find that a different
sequence of assembly would be better.  Any suggestions as to how to
soften, or better still dissolve, Threadlock?  The fixings are small,
dome head, Allen screws  (<3mm dia).

Can a rev counter be fitted to an F reg LWB 110 ?
Z®