On my D1, there is a cable & connector for the driving lamps, there
are none fitted, the switch is there etc.
Can i run the above lamps from the outputs on the D1?
They are going on a light bar on the front bumper, I'm gonna have to

Bit of advice needed here, please, folks ...
I was stopped by the Police when I was coming back from a gig on Saturday
night (K reg' RR Classic 3.9 EFi).
They said I had blinded them with my headlamps on full-beam while I was

Spent 2 hours friday night checking the entire Nerside brake pipe for
corrosion.  Could i find any, could i buggery!.  You can even see the
printing on it from when it was made.  So i thought i ought to check the
offside pipe just in case the tester got it wrong....surely he ...

Does anyone know the best place to look for faults on a rev counter?
300 tdi Disco (1997) and speedo works ok. However, I noticed tonight that
the rev counter is jumping all over the place. At first it was fluctuating
between 1000 - 2000 revs, but then when I slowed down for traffic ...

I have a Freelander TD4 (2001) which is refusing to start.
The engine turns happy on the starter and sometimes tries to fire, but will
not start.  Leave it alone for a couple of hours and it starts first time.
Only this time its been left a while, and still won't start.

Hi all.  After multiple overheating issues have been explored, I finally
have found that the condenser fans do not spin when the AC is on.  In trying
to diagnose the problem, are there any other wires that lead to the fans
other than the black and blue ones that come down from ...

Picture this, 2 shunters one in the tug the other on foot padlocking or
unpadlocking  trailors (a padlock placed on the "red" suzie to prevent the
trailor being used), The one on foot was at the headboard of a trailor doing
just that when the tug driver slammed under the trailor ...

My lovely other half has decided that it's my birthday, and she's run
out of Land Rover stuff to buy me, she's going to get me a compressor
for my soon to be finished workshop.
One she's seen in Machine Mart (what a girl!) are about £120. So thats

I'm picking up the wheels, tyres, cibies, light bar, wheel spats, lift
kit & some other serious sh.t, pick it all up tomorrow.
Extreme, here we come!
Ho baby!

my car has a brake disc that has been grooved by a pad wearing down
and it going metal to metal.
It has 3 circular grooves running round it in the outer 1/4 of the
disc on one side. it is still nice and shiney apart from this (and

I have just been stripping down an old engine I had stashed ready to
weigh it in. I wanted the flywheel and clutch off it first.
It has obviously got wet at some point and the water has got inbetween
the clutch plate and the flywheel/diaphram plate and left slightly

Having just returned from a holiday in Cornwall, I found the small hose
connecting the turbo to the metal pipe into the inter-cooler had fractured
(causing some loss of power, black smoke and noise). I enquired at my local
LR dealer to be told that the small connecting hose can not ...

hello, looking for landrover/4x4 shows for hubby to go to that aren't going
to clean the wallet out, an overnight stay would be good, we have a tent
etc,
any info, free/cheap tickets in and around east anglia. thanks

Whipping the heads off the 3.9 last weekend one of the outer 4 head
bolts decided it didn't want to move. Generous amounts of Plus Gas,
some gentle heat and lots of torque ended-up with the head shearing
off the bolt. Doh.