I've added a couple more links to RAVE sources if you have any more
links please
           feel free to post and I'll save them for later postings
           Derek

Owt planned? I want to keep me caravan used over the winter so am looking
for reasons to use it.

Hi Chaps,
Discovery 92 200TDi  140K
Engine occasionaly looses power at low revs to the extent that it will
only idle and you have to wait until it will pick up again.( this

For sale, need to sell to fund P38 money pit.
1995 Disco 1 in Ongar Blue, 7 seater
247/75/16 Colway MT Tyres on black mods x5
2inch lift on Bearmach springs with lifted Procomp dampers.

Looking at one & the book symbol is up, the heater works fine so it's
not the blend motors, He reckons the ac doesn't get that cold. I'm
reckoning it could be low pressure on the ac side? Most likely a leak on
the radiadtor thingy.

my wheel is alittle to the right when going straight after a fancy wheel
alignment. Also the total toe on the readout says -0.15. Does this mean it
has to be redone. It seem like it may be to much but I dont know. I
complained but the guy said the machine sais it right on ?? Thanks

I seem to be curing the mis fire in stages....bit by bit it is getting
better !!!!
I have cured the Crank sensor loose connection and the engine is a lot
smoother, still lumpy on tick over and at 3200 rpm.

Guys, I have found a P38 in Bridgend, south Wales, anyone able to have a
good look over for me?
--
Nige, talking utter shite since 1967.

Are there better ways of holding the door cards in place than the little
black plastic tabs that seem to snap off so easily?
Gerald

Hiya
Im getting some new shoes on the 90 soon - When funds allow....
Anyone interested in my old ones?
They are probably only 25%worn - you can see the tread joins in the pic,

http://www.roman-road.co.uk/temp/DSC00016.jpg
seemed rather apposite.

   Do you know of any amusing 4wd mistakes (like the time I drove
over a 4-inch tree, got high-centered in a 1971 Land Rover, and had to
cut the tree apart to get out)? If so, they might make great additions
to www.stupid-mistakes.com

I'm a carpenter based in Devon, England. I'm currently driving a big
van but more and more of my jobs are taking me into the wilds so I was
thinking of getting a 4 x 4. I've always loved Land Rovers and so
basically I'm looking for a long wheelbase defender van with a high

I'm having trouble getting the exhaust manifold on my car to seal
properly. Can i use dumdum as an exhaust sealant? it says it will cope
with up to 200 degrees on the tin.
Or am i better off just using some silicone sealant? (I cant get or dont

I have looked, honestly, but I can't find any definitive answer to
this:  if I replace 205/80R16s with 225/75R16s, will there be any
problems with (front) tyres coming into contact with under-arch bits?
I know the diameter difference is minimal, but I'd rather be sure in