Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Land Rover Cars / April 2009

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Clutch juddering30 Apr 2009 21:59 GMT8
All,
If I stop using my 110 TD5 (2001) for a while, the clutch tends to judder
when starting from stopped.  However, this juddering tends to progressively
stop if I use the car regularly, to become normal again after a while.
ping : Oily30 Apr 2009 17:21 GMT6
Hi Martin have you got the new address for what was Selton in Denton I've
googled , excited and all sorts and all I get is a dead number (same one in
my phone book) I've got a CV I need overhauling
Cheers Derek
CB questions30 Apr 2009 13:30 GMT45
All,
I'm currently looking at buying a CB and have some basic questions (I don't
know much about CBs).
First, there is a huge range of CBs around and I'm not sure what to go for,
Bike carrier.29 Apr 2009 21:06 GMT3
Some years ago I saw a bike carrier that was just a couple of bent metal
tubes with threaded ends that fitted onto a couple of the spare wheel
carrier bolts on a Defender.
Now I want one I can't find anyone who sells them...
car insurance29 Apr 2009 00:33 GMT11
Hi folks, has anyone heard anything about an insurance company called
"Sureterm Direct"? They have just given me a quote of £224 comprehensive for
my 94 disco. They say that they are 4x4 / SUV/ RV etc specialists but I have
never heard the name so am checking first. Anyone with ...
Front Wipers28 Apr 2009 19:52 GMT6
When I bougth the car the wipers did not park properly and it was confirmed
that a new "park" switch would be supplied
Now they do work fully but the intermittrent comes on every 3 seconds, the
normal ones very rapidly and teh speed ones result in the wipers almost
Extending the breathers28 Apr 2009 19:52 GMT1
All,
I just ordered a snorkel for my TD5 110 and am now thinking about extending
the breathers (will probably be a DIY job).  The front ones are rather
obvious, at least as to where to run the pipes (along the snorkel ;-).  The
April 25th  .. Plans etc ...28 Apr 2009 09:03 GMT16
http://www.cottagefarmsite.co.uk/
Get in touch with the campsite to book, tell them Paul Draper of AFL
has already booked a caravan spot and you're part of the party, I
suggested two caravans and maybe four tents, though at present they
Drooping with age27 Apr 2009 07:35 GMT4
Oracles,
1996 Disco 300tdi
Rear door dropped (worn hinge pins and worn and slightly splayed collars).
Previous someone had packed the pins with some kind of shim.  This wore out
Some one may know25 Apr 2009 18:40 GMT1
Any one know where I can get a NS Front window regulator in a hurry
It's for a 1996 Disco 4 door
Need it for Monday lunch time
I suppose Ruddock's or Paddock's if they have them in stock
Rear prop vibration SWB S324 Apr 2009 22:05 GMT6
I have just had the rear prop off and changed the UJ. before removing the
prop I had very little vibration from it , it was just a case of the UJ at
the rear being worn ,so I changed them both.
I made sure everything went back the same as it came off ,but now I seem to
EGR & MPG24 Apr 2009 08:54 GMT6
Well The jury is still out.
Just filled up with 87.41l (19.22 gallons) after doing 576 miles. My gut
feeling was that the MPG would not be good as the old DII would be running
on air at 600 miles not 570 odd. However those figures work out at
200Tdi Rev Limit23 Apr 2009 20:49 GMT12
All,
A quick question to try and set up my tacho.
What is the normal maximum revs for a 200Tdi? (Is there a rev limiter
or just a throttle stop :-)
printer cartridge23 Apr 2009 18:22 GMT3
Anyone got a use for an HP 339 black ink cartridge/head?
I've got one bought in error some time ago.  dunno if it's still viable but
never been used, cos the printer I thought it would fit said "wrong print
cartridge".
2.6l 6cyl water pump22 Apr 2009 20:06 GMT8
I'm trying to source a replacement detox (thermostatic fan type) water
pump or overhaul kit for a series III 2.6l 6 cylinder.   They are
quite rare in Australia.   What's the situation like in the UK?
Does anyone know of sources for these bits?
Pages: 1 2 3 March, 2009
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.