Despite the "Huge Tak" and the various miata recipes that are included
along with the paint, rims, and even tires, the 1992 "Miata + Wing" that
runs like a camp in Austin is still for sale.
There have been no problems because the car is still "FAST FAST ANF YUP

I test drove an MX-5 (PRHT) today and it was great.  MX-5 is a little more
snug fitting than the Z-4 (in the cockpit as well as about half the trunk
space) and the ride is smoother (less choppy) in the Z-4.  I live in PA and
the roads suck. This will be a summer fun car - stored ...

If any of you are looking for something to do in May, there are so far
230 cars signed up for Miatas in Moab.
Loren

Hot from the Bloomberg news wire...
All Mazda Vehicles From Car-Carrying Vessel Cougar Ace to Be Scrapped
2006-12-15 13:00 (New York)
   IRVINE, Calif., Dec. 15 /PRNewswire/ -- Mazda Motor Corporation today

the red paint on the metal of our '91 mx shines-up like new but the
paint on the fiberglass/plastic rear bumper and environs is quite dull and
seems to want to stay that way. do i need to repaint that area or is there
something that will shine it up?

My 94 "Aussie Spec" with 110K Km, has developed an odd "chirp" sound. It
occurs intermittently when the clutch is released while changing up gears.
The car is running just fine other than that.  Anyone got any ideas on where
to begin looking?

I started my 97 miata today for the first time in a month
and started down the road, and first I noticed that the
engine didn't sound right, then I noticed that there was
no oil pressure. I came right back and parked it.

I'm getting occasional puffs of bluish smoke from the tailpipe of my 96
Miata 1.8L.
I replaced the PCV valve, which I know can cause smoking if it fails. I
also put clamps on both ends of the hose that connects the PCV value to

Does anyone know when the seat belts on the M1 miata were changed from
bolting to the tunnel versus attaching to the seat?
This is for cloth seats if that matters.
Thanks!

... in the curves?
http://phoenix.craigslist.org/car/250478601.html

i am striping the motor from a 95 m-ed and i am stuck on the crank
pulley.  any suggestions other than using the special service tool?
the supercharger and the tranny have been sent out to be worked on.
tia,

have anyone rigged an intercooler to their jr/sc?  the one off the saad
900 turbo  looks like a possible good fit.  any other possibilities?
tia,
peter

Holy crap, I don't know which is more painful to see, the spelling or
the miata. It is actually advertised as a "The ultimate miata + wing".
Unbelievable.
The wing helps with downforce at "around 160 mph".

My Miata got broken into yesterday, someone got into the passenger side by
removing the tonneau cover.  They unzipped the zippers but ripped the snap
studs out of the dashboard, cracking it where the studs screw in.  They
opened the glove box and didn't take anything, they opened ...

got my top cut yesterday - too bad someone didn't notice the doors were
unlocked. anyway... looking into a replacement for it and wanted to
know thoughts on robbins brand, also this may be the best opportunity
to get a cloth top, i assume it has a glass window - only about 150