| Thread | Last Post | Replies |
|
| getting rid of faux wood on console and dash | 19 Dec 2006 00:53 GMT | 3 |
Any advice on how to remove it without damaging the black plastic on a '97 miata? Should I heat it up first? TIA
|
| R&T Tire Test | 19 Dec 2006 00:46 GMT | 20 |
Road & Track did a test of 5 17" tires on a new Miata.. Michelin Pilot Preceda Bridgestone Potenza Pirelli P Zero Nero
|
| alarm system | 17 Dec 2006 21:09 GMT | 3 |
Every time i unlock the driver door on my 2004 MX5 the alarm goes off. If i use the spare ket the same thing happens but if i uase the passenger door it is ok. Any ideas??
|
| Sounds a lot like justice... | 17 Dec 2006 14:16 GMT | 8 |
From today's San Francisco Chronicle:
> (12-13) 08:51 PST -- In a bizarre chain of events, a suspected drunk driver in > a stolen vehicle was killed by a hit and run driver early today on Highway 4 in > Pittsburg as he attempted to run from police, according to the California |
| Need a 1997 miata for $2950.00 in Texas? | 17 Dec 2006 14:08 GMT | 5 |
Not many details, I wonder what is wrong with it besides the top. It is either something major or that car is probably sold by now. http://austin.craigslist.org/car/248519725.html Pat
|
| manifold bold torque specs needed | 16 Dec 2006 22:09 GMT | 1 |
Can someone tell me what the torques specs are for the 12MM manifold bolts on my 2000 Miata? I couldn't find this on the Miata.net garage torque listing. I just went through the process of taking off the top of the manifold to clean the EGR passage to clear the check engine light ...
|
| Miata wanted | 15 Dec 2006 12:29 GMT | 5 |
I'm seriously looking for a Miata with Sport option and air, mods are OK, in the CT or NY area. I prefer 2000 or earlier. Advice is welcome. Thanks Eric
|
| KJ-ZEM- Miller-Cycle engine | 13 Dec 2006 04:50 GMT | 6 |
How can I find out if this is a non-clearance motor. If the timing belt breaks, does the top end jam up or is there room enoughfor the valves. thanks thanks
|
| Clear Wheels | 13 Dec 2006 04:26 GMT | 29 |
Bling, bling... http://www.forgiato.com/radurra/index.htm
 Signature Scott Streeter
|
| Engine misfires -> Cat Converter fails | 12 Dec 2006 21:08 GMT | 8 |
A few weeks ago in an afternoon I'd parked my Miata at an underground parking lot. When I was ready to leave I started my car to find it idling high at around 1500 rpm, which is not unusual considering the low temperature at that time. However, even at that rpm the car felt
|
| Double hoop showbar install? | 12 Dec 2006 14:09 GMT | 5 |
My GF is buying a very nice '01 se. That car is too much fun! The question is, She likes the double hoop showbars and I was thinking getting her the bars for Christmas. They are all over ebay and fairly reasonable, but with no instructions. They are bolt on, but are ther
|
| Stuck throttle? | 12 Dec 2006 05:47 GMT | 2 |
Searched the archives, didn't see anything that really applied... The car's a '90 5sp with about 100k on it & in decent mechanical shape. However... Occasionally, when one has the throttle to the floor for a period of time, after lifting your foot, the pedal remains pinned. It's
|
| Miata thrift store items | 12 Dec 2006 05:41 GMT | 1 |
I found my first miata items ever at a thrift store today. There was a very familiar looking box on the shelf at Goodwill for the M1 cupholder. Instead of a cup holder inside, there were two mint-condition M1 ashtrays. At $2.00 total, I couldn't pass them up.
|
| Shock replacements | 12 Dec 2006 05:39 GMT | 9 |
My '97 is due for replacing the shocks, and I've got them all ready, sitting in my garage. Since my life is somewhat hectic, to say the least, I'm not sure if I'd be able to find time enough in a weekend to do all 4. I was wondering if there is any reason why I couldn't do the
|
| MazdaSpeed MX5 | 11 Dec 2006 23:39 GMT | 1 |
Don't know if anyone's interested? http://phoenix.craigslist.org/car/246863842.html Disclaimer, I know nothing about the car or the poster. You're on your own if interested but I think it's very pretty if that helps?
|