| Thread | Last Post | Replies |
|
| WONDERFUL DEAL! | 29 Feb 2008 00:41 GMT | 5 |
http://phoenix.craigslist.org/car/586461749.html But I'll sell you MY 1992 for only $9,750! <GD&R>
 Signature XS11E, Killing all posts from Google Groups
|
| Clutch System on a Miata 1991 | 27 Feb 2008 17:06 GMT | 2 |
I am having a problem. I just installed a new Slave cylinder because my clutch master cylinder was leaking down and this site advised me that that was most likely the problem. Well, I can let it sit over night and the next morning the master cylinder is empty again. I am not ...
|
| Clutch/shifter problem | 27 Feb 2008 12:53 GMT | 8 |
I cam out this morning and couldn't get the thing to shift until the car had warmed up for about five minutes. The clutch has felt the last week ro so as if it's not disengaging until the pedal is almost all the way down.
|
| Blue one? | 27 Feb 2008 04:32 GMT | 3 |
http://phoenix.craigslist.org/car/588153007.html I don't know anything about this, just saw it on Craig's List for Phoenix. The price is good, no title, of course...
|
| Stalling or Cutout of Engine When Shifting Low Gear | 26 Feb 2008 14:30 GMT | 2 |
Has anyone owning a Miata had the following problem or know what is causing our problem. After traveling for an hour plus or so and then stopping and starting as you go through heavy traffic and numerous red lights in 80 degree plus temperetures the car stalls out as you shift ...
|
| 1992 miata | 25 Feb 2008 03:31 GMT | 7 |
I am thinking about buying a 1992 miata with 69K miles on it. Anything major to look out for on this 16 year old car ? I like it because it is yellow. He is asking $7900 for it.
|
| Possible clutch problems on my '97 Miata | 24 Feb 2008 13:24 GMT | 3 |
Just yesterday I noticed a potential problem with my clutch. It seemed like it was getting worse as I drove to work today, but I may have just been getting paranoid. In any case, it's not like it normally is.
|
| Need tire/wheel advice, quick! | 24 Feb 2008 06:08 GMT | 17 |
I have an 04 MSM with 17" Racing Hart wheels. About 6 months ago the city scraped the road I take to work and the next morning I whacked both right rims on a manhole which was sticking up probably 2" from the roadway. Nose to tail traffic, I didn't even see it.
|
| New battery. | 24 Feb 2008 00:31 GMT | 32 |
I've reached the point in the life span of my battery when 1. The car will crank enthusiastically and fire right up if driven daily, 2. It cranks a bit slowly and hesitates, may take a couple of trys to
|
| Hey Carbon - MSM wheels for sale | 23 Feb 2008 10:26 GMT | 1 |
No affiliation as usual. $600.00 shipped. One has curb rash. Quite a savings over factory and it leaves you with 2 extras in case of future bends if you decide that staying with the OEM wheels is an option. http://tinyurl.com/2vg64c
|
| Touch up paint recommendations | 23 Feb 2008 04:05 GMT | 1 |
I just have a couple of rust spots under the trunk lid next to the plate lights. I just want to grind it down and then spray paint the area. It's under the lid and won't show so it doesn't have to be perfect but I'd like the color to match as best as possible. Any
|
| 16" OEM Miata wheels - almost new for $600.00 | 23 Feb 2008 01:03 GMT | 8 |
Not affiliated with the seller, but at $150.00 a wheel, this is a very decent deal. Not sure how good the tires are. http://tinyurl.com/36lbyh Pat
|
| UK Mazda 3 - Engine Management Light | 21 Feb 2008 20:50 GMT | 4 |
I have a 2007 Mazda 3 Diesel and for the past year, the engine management light has been on. It has been back and forward to the Dealership but they can't find any problems and are continuing to look.
|
| Headlight lamp | 21 Feb 2008 06:06 GMT | 3 |
I am so stupid I cannot get the lamp out of the socket on my 1998 Miata. It does not seem to twist out and there appears to be no retaining ring. There are clips but you cannot get to the one on the fender side. I have had some bad experience breaking these clips off
|
| Torque wrench - which one to buy? | 20 Feb 2008 20:05 GMT | 1 |
I'm looking for a good 1/2" torque wrench and so far I have only some really cheap rubbish ones and some really expensive ones (like a Bahco costing like 300+ US!). I wonder if it will even make sense for me to buy it on-line and have it
|