| Thread | Last Post | Replies |
|
| mercedes 82' 380sel | 17 Jun 2004 04:07 GMT | 5 |
I am trying to solve these 2 problems I have with this car. first, I do not get a kickdown,and it is shifting really fast. Also, the car runs rough and when I shut it off if the car sits more than 2 mins. it is really hard to start. If i try right away it will fire right up. I have
|
| New Mercedes Radio in 1983 300D | 17 Jun 2004 03:51 GMT | 4 |
I have been considering upgrading the radio in my 1983 300D. I would like something that looks decent in the dash and matches the rest of the car - unfortunately there are few new radios that have the amber backlighting like Mercedes uses. Does anyone know if it would be ...
|
| Hey Yall, whar iz tha fuel pump relay under tha bridge? | 17 Jun 2004 03:43 GMT | 2 |
Once upon a time, the fuel pump relay fuse burned out on tha old 1992 400E and that left me by the side of the road waiting for the tow truck. MB help line suggested that it was quicker for the tow to the city an hour away than for them to come fix it. First time I had ever been ...
|
| Question about Keyless Entry and Keyless Go | 16 Jun 2004 20:51 GMT | 7 |
I am wondering what would you do to unlock the 'dead Mercedes' when the battery drains down. Or when the remotes or transponders malfunction or are drained. I've seen lot of current models without the keyhole on the doors and are opened with remote or transponder.
|
| 1989 300E Alen Fan Bolts?? Help | 16 Jun 2004 20:01 GMT | 2 |
I was taking the plastic fan off and one alen bolt is stripped at the head of the bolt. Any idea how to get the last bolt off? Thanks
|
| Python rebuilt fuel distributors? | 16 Jun 2004 14:39 GMT | 7 |
Has anybody had any experience with fuel distributors rebuilt by Python? I may be buying one for my 380SE. Thanks, Richard
|
| thumping sound in E300 diagnosed and repaired | 16 Jun 2004 14:25 GMT | 3 |
A while ago I was asking for help from this ng with a problem of noise in my 1991 300E. It started last October, and would come and go. It stopped making the noise 3 times on my way to the shop. Once in the driveway of the dealership!
|
| Newbie! 82 380sl | 16 Jun 2004 12:50 GMT | 2 |
Take delivery in about a wek. Original 145k fair to good condition and inspected. Private party. Can anyone tell me what I should be on the look out for. I already have heard they need a dual timing gear. Thanks, Ken
|
| Brake master cylinder problem | 16 Jun 2004 08:12 GMT | 2 |
After replacement of brake lines, I tried to bleed the system but after some pumps on the brake pedal, at rear caliper starts to come out only air regardless how long I pump. Finally, I found that the problem seems to be in the master cylinder (made
|
| Death of the uniwiper and parts question | 16 Jun 2004 02:59 GMT | 1 |
1995 c280 with 65K. Last week the windshield wiper died a fitful death. When I turn the switch I hear a nasty buzzing, but that's it. Is this a bad, time consuming repair (the right headlight wiper appears to suffer from the same malady but I am assuming its unrelated)
|
| Anybody in this group making and/or using Biodiesel? | 15 Jun 2004 21:18 GMT | 13 |
A friend of mine in Silicon Valley switched over to B100 for all of his vehicles, including his 1983 MBZ wagon. He pays $3.00/gal. delivered. Since diesel just hit $1.33/gal. here in Napa, I wanted to get
|
| Hubcaps for a 190E | 15 Jun 2004 20:31 GMT | 2 |
One of the hubcaps was lost/stolen off my Mercedes 1986 190E. Does anyone know if I can replace it (or maybe the full set) with any 16" hubcap? There are some nice ones out there, but would love to know before I buy. Thanks, Lush
|
| price | 15 Jun 2004 16:29 GMT | 2 |
what is the most expensive mercedes car? thank you
|
| 1980 300SD Climate Control Amplifier | 15 Jun 2004 12:38 GMT | 8 |
I think that I may have a problem with my amplifier, I have found it, I can hold it in my hand, but I'll be damned if I can unplug the thing...any suggestions? Thanks, Bob Moore
|
| Rust on door sill panels... | 15 Jun 2004 09:55 GMT | 4 |
My new (04) E320 is beginning to develop some rust on the stainless steel door sill panels (for whatever reason). Anyone have any experience cleaning this off?
|