| Thread | Last Post | Replies |
|
| Driver's Powered Headrest on C320 | 31 Jul 2004 19:57 GMT | 5 |
Got my car back from MB service and noticed that the headrest no longer moves down to my preferred position for it. It remains high and has only about 1/2" of movement. Dealer (on phone) says there's a button on the seat to release/reset the range but I cannot find it.
|
| BOSCH CERAMIC BRAKE PADS | 31 Jul 2004 19:16 GMT | 1 |
Just passed through Auto Zone and noticed the NEW CERAMIC brake pads just out by BOSCH. Does any one have any information on their perfotmance?
|
| '63 M.Benz 220 SB HELP!!! | 31 Jul 2004 11:51 GMT | 2 |
Hi ya'll. I'm new here. We recently got a 63 220 SB, when we got it it had a pretronics (i don't know if that's the right word, sorry) thing on it, and my step dad decided to take it off because it wasn't even the right one for the car, and we wanted to go back to points. We got
|
| thoughts on 2004 E320 wagon | 31 Jul 2004 02:59 GMT | 1 |
I am bailing out on my c320 wagon and looking at the e320 wagon in a moderately trimmed version. I am also considering the ML500 special edition and also the Audi allroad in the 4.2 liter (although 2.7 turbo is not out of the question)
|
| New Owner | 31 Jul 2004 02:55 GMT | 2 |
After years of anticipation I am now the proud owner of a 1989 R107 300SL. Not my first Merc, I had a W123 280E a few years ago but this one is 'a bit' nicer ! My first question for the group is where is a good location to install
|
| Heater valve..... | 30 Jul 2004 23:25 GMT | 1 |
Can anybody tell me what the heater valve does on my 190e 1.8 ?........I've just replaced iy 'coz it was leaking and can't figure out why it is there as the heat controls on the dash turns the heat up and down without it........where does the vacuum come from to operate this valve ? ...
|
| W210 Misfire in Cylinders 5 & 2 at Idle | 30 Jul 2004 22:09 GMT | 3 |
"Check Engine" light keeps on turning on. OBD reader indicates misfire in cylinder 5; misfire in cylinder 2; and random/multiple misfire errors. I have replaced all 6 spark plugs, the ignition coils, spark plug wire set, and added techron to gas to clean
|
| help w/paint problem | 30 Jul 2004 21:33 GMT | 2 |
I need to ask some advice, please... I brought my 97E320 back to the body shop that did repair work (the clear coat peeled along the top) to re-do the seal coat. Car was re-done and looks great - but does not feel great.. the side is
|
| 240 TD what is it worth? | 30 Jul 2004 21:30 GMT | 1 |
I am new to Mercedes cars, my problem is I am in two minds to buy this old 240 diesel estate. It is tatty, has no wheel trims, a bit of rust. It has done 220,000 miles, no problem for a diesel merc I would of thought. It has 10 months MOT on it, and 6 months tax. It is on a c ...
|
| breakpad change 450SL -73 | 30 Jul 2004 21:10 GMT | 2 |
im just getting started changeing... is it "only" to knock out the 2...pins???... and then lift out the pads ? anything else i should think of ?
|
| Paint comes off 99 CLK 320 muffler.... | 30 Jul 2004 19:48 GMT | 1 |
Has anyone else got this problem? The paint just peeling off the exhaust? Its like a matt black finish. please... let me know. Thanks!
|
| mis firing at low revs | 30 Jul 2004 11:06 GMT | 6 |
My C180, UK, has been fine for a year or so, its 5 years old, and next service due in 3k miles. Its started backfiring a little and missing, as if its only firing on 3 cylinders at low revs, between 400 and 1000 rpm. Once its got going its
|
| TORQUE ALLOY WHEELS | 30 Jul 2004 03:32 GMT | 7 |
Can someone give me the proper torque of wheel bolts, with alloy wheels? What is the conversion factor for Foot pounds, to Inch pounds,... and Nm, (called Newton meters) not in the manual
|
| W124 Smaller Than W123? | 29 Jul 2004 21:39 GMT | 4 |
Is it my imagination, or is the W124 a slightly smaller car than the W123? I've owned two 123s and am consider- ing a 124, but the car looks significantly smaller, almost as small as a 190. Maybe it's the styling that
|
| SL 107 cruise control | 29 Jul 2004 15:05 GMT | 1 |
The cruise control on my 85 380SL works inconsistantly. Is there a common failure part on these, or where/how should I begin troubleshooting? Thx.
|