| Thread | Last Post | Replies |
|
| All 190 door panels ... | 31 Aug 2004 19:23 GMT | 5 |
Has anybody thought of an ingenious way to repair the tops of 190 doors where the MB tex separates from the pressboard. I have 3 of these (84, 87 and 93) and they all have the same problem. Apparently the MB tex shrinks and pulls the top edge loose where it goes
|
| California extended auto warranty? Go4warranty? | 31 Aug 2004 18:53 GMT | 2 |
looking for an extended auto warranty and found www.go4warranty.com Anyone buy or use one? any info would be great Reasons I am thinking of them: A+ best rated Mercury Insurance backed
|
| 1987 190E mercedes screen wiper | 31 Aug 2004 18:14 GMT | 4 |
My screen wiper (one centrally mounted single wiper for both sides of the screen) has ceased to function. I thought it was a fuse, but they all seem OK. If I put the screen wiper manually up to ~ full centre, then turn on the wiper, the wiper goes to fully left of the
|
| 1970 280S with 1969 Engine, head stamp says "250"? | 31 Aug 2004 16:10 GMT | 3 |
I need to replace the distributor on a 1970 280S, but, was told the engine was swapped with a 1969 280S engine. After closer inspection, the head says "108 016 05 01" And, towards the back of the head it says "250". So, did the person who did the engine swap 20 years ago
|
| Sourcing Engine for 1973 Mercedes 220 | 31 Aug 2004 00:31 GMT | 1 |
This is my first posting to the group, so apologies that it comes with a request for help :-) The engine of my Merc recently blew up and - as far as I can tell at this stage - will need replacing.
|
| New M-class | 30 Aug 2004 23:44 GMT | 13 |
Hi, does anyone have information about the new version of Mercedes M-class, when will it be introduced? And is there any web pages with previews of it? Thanks!
|
| 82 300sd drive shaft | 30 Aug 2004 15:24 GMT | 3 |
has anyone ever replaced the universal joint on the drive shaft on a 82 300sd.was it a fun job or fairly straight forward.Does this universal tend to last a long time?
|
| 1999 e300 CD Changer Question | 30 Aug 2004 15:11 GMT | 1 |
Folks, One more Q ... Car was manufactured in 7/99. Does any one know if the car is pre wired for a optical out CD changer and if yes, would it take a changer
|
| Paint color info/? | 30 Aug 2004 10:20 GMT | 3 |
I have a light blue metallic 1984 380 SL the paint code is 930. Does anyone know what the name of this color was for 1984? I believe it is essentially the same as "Diamond Blue" but that color carries a different paint code for the 86-89 560 series [355] I think.
|
| how important is hood pad? | 30 Aug 2004 08:11 GMT | 10 |
87-190D 2.5, 248,000 miles: my hood pad is breaking apart and splits every time I open the hood. But how important is its existence? Do I really need to put on a new one? Other brand don't have hood pad at all.
|
| Weight of 380SL Hardtop | 30 Aug 2004 05:29 GMT | 2 |
My 1985 380SL came without a hardtop. I plan on purchasing one and will build a hoist to keep in over the car. Quick question: How much does the hardtop weight?
|
| Online Parts store info needed. | 30 Aug 2004 05:24 GMT | 2 |
I am looking for brake pads and rotors for my '00 ML320. Can anyone tell me where can I buy genuine parts online at decent price? Thx for you guys info and help. xtremehawk
|
| Water on floor | 30 Aug 2004 04:07 GMT | 2 |
Let me start by saying, I live on the Suncoast of Florida off the Gulf of Mexico. During the summer we have torrential downpours and the A/C is on whenever I am in the car. I have a 1985 300D. I have noticed water dripping on the floor under the passenger and drivers sides. It is ...
|
| How to reset service indicator on the cluster? | 30 Aug 2004 01:30 GMT | 1 |
All, I just had a oil changed on my '00 ML320. Can anyone tell me or help to find where to download or get instruction for resetting oil service indicator? Thank you very much for you all help.
|
| '92 500SL | 29 Aug 2004 19:06 GMT | 2 |
Cannot unlock the driver's seat backrest (dossier) to access the back compartment. Passenger side is OK The handle operates fine, has the same spring feel it always had. Tried as hard I could to have it unlock with arm pressure, but to no avail.
|