Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Mercedes-Benz Cars / August 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Door trim adjustment29 Aug 2004 18:31 GMT1
Is there any way to adjust the location of the black plastic trim that
comprises the door latch handle back to the seat adjustment controls without
removing the door panel?
Long ago my local dealership had to replace a window regulator on the front
Blowing fuses29 Aug 2004 09:39 GMT5
Have a 190 D 2.5 Automatic
I have 2 problems hope some one can give me a hint on following:
1. Fuse no.: 1 blows after a few minutes and up to 20 minutes. I have taken
off the leads to the air blower and it wasnt that, is there a electric
parts.mbz.org Rabbits??28 Aug 2004 22:04 GMT9
Greetings All,
I've seen several references to the http://parts.mbz.org/ site.
Pronlem is that all I get is two pictures of rabbits when I direct my
browser to that address.
1997 S320 Battery Light - Transmiision Shift28 Aug 2004 17:02 GMT7
Today while drinving my red battery dash light came on. I noticed the stereo
then going on and off. Then next time I drove the car the transmission stays
in first, no shifting......engine runs fine.
So, is this a charging issue with the alternator or do I just need a new
E320 Climate Control28 Aug 2004 07:03 GMT2
I get cold air on the passenger side and not so cool air on the driver side
of my 96 E320.  A mechaninc friend of mine said he found the same problem
in the E300 Diesel, but couldn't find out why.  Any suggestions?
Mercedes Safety28 Aug 2004 01:24 GMT4
I am very satisfied with my '04 E500.  One of the reasons I have always
selected Mercedes is build quality and safety.  I am not an engineer but one
can see how massive the pillars and roof rails are.  I was T-boned in a 560
SEL in the '80's (not a scratch - insurance company held ...
Sqweeking sound - 85 MB 300TD27 Aug 2004 23:24 GMT1
My 1985 MB 300TD has started squeaking (like a hawk) when running and the
automatic transmission is about to or right after shifting gears (like at
~45mph).  Accelerating after the gear change - the noise goes away.  The car
runs fine - there are no problems with gear shifting.  ...
84 Mercedes 300TD replace shift light bulb and engine won't shutoff27 Aug 2004 23:06 GMT8
Help.  My engine will not shut off after turning key to off position.  I
had this problem before and my ex fixed it.  Have had car for five yrs.
now and it just started again after an oil change.  How to fix it?  Also,
I need to change the bulb in the gear shift.  Can't see at night ...
DriveShaft Vibrations 1994 C22027 Aug 2004 15:55 GMT8
While driving I had a SEVERE!!! Vibration that felt like it was coming
from behind me. I thought it was the U-joint but when I put her up on
the jacks I noticed that the front Flex Disk was just about destroyed.
Hopefully this has saved me several hundred dollars. Obviously I need
Air conditionting question?27 Aug 2004 07:45 GMT9
I have a 89' 560 SEL. My question is this does anyone in the group
experience this problem, I was driving last night and the humidity was up
about 95%. All of a sudden, the windshield starts to fog up and I'm losing
visibility. I pulled over and notice the condensate (fog) was on ...
92 300sl roll bar27 Aug 2004 02:15 GMT3
    The pop up roll bar on my 300sl keeps popping up after I put
it down...anyone know why this happens???
B F Rollins
B F Rollins II
560 sel  a/c27 Aug 2004 00:26 GMT4
have a long delay for compressor activation when first turned on. then
blows cold for approx 5 mins then comp cycles off. and long delay for comp
again. on and on. any thoughts on this would be greatly appreciated.
Mass Air Sensor Rebuild26 Aug 2004 18:27 GMT4
Does anyone know if Bosch mass air sensors can be rebuilt and who might do
this?
The cost of these items is crazy - There appears to be small bridge circuit
plus the thin film element and a thermistor - It can't be worth more than
w124 220E engine not running smoothly 26 Aug 2004 17:09 GMT4
Car is w124 220E '93 with 2.2 litre 16 valve type M111 engine with
automatic transmission. This engine has motronic HFM fuel injenction
system. Problem is here:
Sometimes engine is running poor when pressing accelerator pedal about
Interior ligting wiring on '87 E250TD26 Aug 2004 16:59 GMT3
Any idea where to get wiring diagrams for my E250TD since my interior
ligthing is broken in the rear.
Thanks
Tomas
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 July, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.