Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Mercedes-Benz Cars / August 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
removing steering wheel with airbag16 Aug 2004 19:26 GMT1
My windshield wiper switch quit working the other day and needs to be
replaced.  This is the combination switch on a stalk that controls the turn
signals and high-beam as well.  To replace it I have to remove the steering
wheel which is equipped with an airbag, and that makes me ...
IDLE PROBLEm16 Aug 2004 15:51 GMT5
i have 1985 380se idle is givin me problem frist ma car idle used to
realli high but ma car engin jus shut down it shakes when start
sometimesdont start i have press the acclater to engin to be start
can please any 1 give help please i will be veryy thank ful if any
how to change Oxygen Sensor16 Aug 2004 07:07 GMT5
i want to where is Oxygen Sensor locted i want to change my car sensor
the is is 380Se Benz 1985 does any one knowz where it locteddd so i
can chage it please help
Mercedes CDI16 Aug 2004 00:38 GMT19
J'ai eu des probl?mes d'injecteurs avec ma Mercedes C cdi, si d'autres
personnes comme moi ont eu ce m?me souci, nous pourrions alors en d?battre.
JCN
service indicator15 Aug 2004 18:32 GMT3
How can I reset the serice indicator on a Merc C180 S reg ?
Having been made redundant, I cant afford Sterlings service, and just had a
service at a local garage, but It still needs the indicator resetting on the
oddometer.
E-320 199815 Aug 2004 16:41 GMT4
sunroof opens about 3/4 of the way and then the cables bind up any one have
any idea what is wrong
                         thanks papa
1997 E420 wheel fit15 Aug 2004 00:19 GMT2
I'm searching for new wheels, something a little larger (17 inch) for my
E420. Looking through eBay and Craigslist there are a lot of AGM (OEM,
not replicas) available but I don't know what offset I need.
Staggered or identical I have no preference. I actually really like the
Poor Gas miles helppppppppppp14 Aug 2004 16:50 GMT1
i fill up my tank it gave me oly 100 miles its too less mile anywhere
i go i need to putt gas in it cost too much money any 1 hel
pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee wat is wrong if
its Oxygen Sensor can some tell where is it located i will be very
300 E Mercedes-benz14 Aug 2004 14:36 GMT3
I was driving today it was 15 mintues my driving, all the warning
light turned on. And my stering start jaming then car could not move.
THen I turn off the engine and then start again, then it all work
fine. I just don't understand what happen.
my engin14 Aug 2004 08:07 GMT1
my engin oil start leakin i dono wat happa any help its 380se 1985 benz
Atlanta Benz mechanic14 Aug 2004 04:08 GMT1
I am talking to a man in Atlanta about purchasing his '84 300SD. Could
someone recommend a good shop to take the car to for pre-purchase
inspection?
differential pressure, EHA valve fuel leak14 Aug 2004 01:01 GMT1
I have a problem with a leak on the differential pressure valve (also know
as the EHA valve) on my 300E--it's the little black box that screws to the
back side of the fuel distributor.
Before I replaced the two o-rings, gas was actually dripping off of the
S320 for sale13 Aug 2004 22:59 GMT1
Evening all,
I'm new here but I have the following for sale:
1994 M reg, S320 Auto Saloon, Met Silver, 273,000 miles, lots of history.
black leather etc
diesel power surges13 Aug 2004 22:40 GMT4
I have a '97 E300 diesel with about 135k miles. When holding fairly constant
speeds of between 35 and 50 mph (with or without cruise control) the engine
surges at about one surge per second. It does not happen at low speeds or at
high speeds. And it does not always do it.  At first ...
front flex disc torque spec 300E13 Aug 2004 20:16 GMT2
Can anyone tell me the torque spec for the front flex disc on a '89 300E 3.0
and if I should use locktite?
Many thanks,
Mike
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 July, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.