| Thread | Last Post | Replies |
|
| what's the best garage floor cover for sucking up ATF? | 22 Feb 2005 14:07 GMT | 13 |
OK, the leak on the W126 isn't going to be fixed. Any recommendations for keeping the goop off of the floor?
|
| 300CE Seatbelt presenters | 22 Feb 2005 01:31 GMT | 1 |
I have a 1991 300CE but the seatbelt presenters dont seem to work. Checked the wiring under the seats all look fine, also checked the switches on the doors, I believe there are relays somewhere in the back near to the rear left and right windows?
|
| Can I mix synthetic with conventional oil? | 22 Feb 2005 00:05 GMT | 7 |
I normally use synthetic (AGIP Sint) oil in my 86 300 SDL. Since the oil light came on and I have a 3 hour drive to do, can I add a quart of 15W-40 diesel oil until I can have the oil changed? Thanks,
|
| 1985 380SE Window Wiring | 21 Feb 2005 21:42 GMT | 3 |
I need help assembling the wiring on the central console in the front for the rear driver side passenger window. If anybody can provide the wire color and the hole number it belongs to I would greatly appreciate it. Thanks,
|
| Is Keyless Go worth buying? | 21 Feb 2005 20:59 GMT | 3 |
Thinking about ordering a new E350 and would like your opinions of Keyless Go. Is it really more convenient? It reliable?
|
| 1993 400SEL | 21 Feb 2005 20:34 GMT | 1 |
Hi all just some quick info needed. This fellow I know is selling his 1993 400SEL with only 55,000 miles on it?! How reliable is this type of vehicle? It's a W140 chassis. TIA
|
| source for wiper blades wanted | 21 Feb 2005 19:46 GMT | 5 |
Does anyone have a source for OEM or aftermarket (but quality) blades or rubber inserts for E-320 2004 cars? I just bought a complete set of wiper blades for my 2004 E320 wagon. I had the car in for service and called the shop and told them to put
|
| Use of 140 weight gear lube in rear end-1998 C230 MB ? | 21 Feb 2005 18:10 GMT | 3 |
I suspect I have a worn pinion gear (scuffed?)which is a bit noisy. I was thinking maybe a heavier weight 80-140 weight lube might quiet it down abit for the time being. I am not in a big hurry to replace it at this time. Is this a bad idea.? Before we bought the car it appears
|
| 300SD: starter bolt size? | 21 Feb 2005 18:04 GMT | 3 |
I have a 1985 300 SD, the starter is hung/seized up. There are two hex head bolts on the rear of the starter that have to come out. I could find only metric allen drivers to 10 MM (a set) at Autozone and Sears, but it's bigger than that. It seems to be 3/8 in. more or
|
| 420 SEL Steering Niose | 21 Feb 2005 18:02 GMT | 2 |
My old 420 SEL Makes a noise from steering When 1st Started Any info Thanx
|
| approved oils -- Flexible Service System | 21 Feb 2005 08:41 GMT | 8 |
Does anyone have the current list of approved oils for the Flexible Service System FSS? My list is dated October 2000 and has eight oils. Only one of them, Castrol syntec 5w-50, is suitable for Wisconsin (temperatures below -4 deg. F) and is readily available.
|
| Shop Manuals on CD | 21 Feb 2005 08:36 GMT | 2 |
I've noticed on ebay someone is making Mercedes shop manuals available on CD- cheap. Anyone ever used one, or seen one? Are they legit? Is the quality there? They say "third party" manuals. Interestingly, the sellers don't seem to reply to my emails, which should tell you ...
|
| 190d Transmission Problem | 21 Feb 2005 08:33 GMT | 6 |
I have a 1990 190d 2.5 auto and it seems to have a slight problem with transmission. I have looked on this forum and see that I am not the only one who has experienced this so hopefully you guys can help!
|
| Old Becker radio information | 21 Feb 2005 05:23 GMT | 8 |
I am about to remove the original Becker radio from my '79 w116 300sd. I really like the feature that controls to antenna, allowing a partial or a full extention (or none at all) when the radio is turned on
|
| oil change | 21 Feb 2005 05:22 GMT | 20 |
I have to change the oil on my 1995 E 320 for the first time. I bought a filter-element, but can not find where to put it. And also,....... where is the oil drain plug
|