Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Mercedes-Benz Cars / April 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Shift chain in 190E?30 Apr 2005 20:50 GMT2
I recently bought a 190E from 1984 (270.000 km) and I was told by a
friend that I should replace the chain in the topchamber if I didn't
know whether it has been replaced before. He said it should be replaced
for every 200.000 km. Anyone know if this is true?
S 280 Control Box failure30 Apr 2005 18:44 GMT1
Does anyone know why the Control Box (Chip) would suddenly fail?  My S 280
just had this problem a couple of days ago and I had to change the control
box and the fan control box - two major expenses.  I would like to know the
cause for such a failure.  This car has run 10,000 km and ...
Smartkey question30 Apr 2005 18:04 GMT9
Does anyone know whether a smartkey can still
start the car if it runs out of battery?
(I understand one would need to use the mechanical
key to unlock the door, but I assume the
thanks for the advice...30 Apr 2005 10:26 GMT2
Hey all, I just wanted to say thanks to "Tiger", "T.G.Lambach", and
"marlinspike" for the input.  I have since checked out the idle control
unit on my car, and just by moving it back and forth, the idle of the
engine drops down to about 700 rpm...I realize that the part does need to
doesn't want to stop...29 Apr 2005 23:06 GMT8
I just bought an SEL 380 ('81) for $1000.  It's in really good condition,
but I am noticing a problem right away - it seems like the throttle is kind
of sticking...like at a stand still, its revving at 1500, but sometimes at
a standstill it only revs at 500. When its revving like ...
Upper A-arms and lower strut joints29 Apr 2005 22:06 GMT3
Looks like I need both upper A-arms and both lower strut joints
(+ alignment) done on an '83 300D.  What would be a fair dollar
value to have this work done?
500 SEL29 Apr 2005 17:42 GMT9
Does anybody know whether the front and rear screens are bonded or held in
by rubbers on 1984 500 SEL
Thanks in advance
C320CDi Saloon For UK - When can I get one?29 Apr 2005 17:19 GMT3
who knows when this will be available?
its out in Germany already and has been road tested in the UK.
Have heard July but looking for information please.
Smell of diesel fuel inside of your diesel MB29 Apr 2005 14:20 GMT30
I know that regardless of the vehicle itself, the smell of diesel fuel
will still be there.  Is there a way to minimize the smell?
Thanks,
Mia J.
SLK tuning29 Apr 2005 10:28 GMT2
I have a SLK  1999 model.
Do anyone know any tuning possible for this car?
Also if its possible to mount a compressor on the engine?
Rgs,
ML270 + Glow Plugs29 Apr 2005 09:14 GMT3
Recently purchased a 51 plate ML270 and after running it noticed that
the glow plug symbol on the dashboard stays on longer than normal on
the dash. After about 5 mins the glow plug symbol vanishes. Am
somewhat concerned as to what this means so any suggestions would be
97 E420 Factory Installed TELEPHONE28 Apr 2005 17:03 GMT6
Hey Guys,
I purchased a 97 E420 last November and it came with an installed TELEPHONE.
I'm interested in removing the PHONE and wonder if anyone know of any
problems I might run into and REGRET?
C CLASS SUV to be built in Bremen28 Apr 2005 16:49 GMT1
(  C Class SUV  ? )
http://www.forbes.com/business/services/feeds/ap/2005/04/28/ap1982223.html
DaimlerChrysler to Build SUV in Germany
04.28.2005, 04:31 AM
'89 300SE #8 Fuse Blowing28 Apr 2005 15:39 GMT3
I have a fuse that keeps blowing on a 1989 MB 300SE it is fuse #8 and
controls the door locks, rear interior lights, power antenna and other
items like the seat belt sensor indicator.  I replaced the fuse and
everything worked for a while and when I was turnng right off of the
HOW TO PAINT PLASTIC28 Apr 2005 15:31 GMT10
I am replacing the plastic "grill insert"  on my 190E due to a minor
accident.   I want it to be flat black,  to contrast with black
exterior.   Bought new insert, and scrubbed it with simple green and
toothbrush  air dried it, and sprayed on      2 coats of grey primer.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 March, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.