| Thread | Last Post | Replies |
|
| Can anyone help w/ a motor question? | 07 May 2005 02:33 GMT | 6 |
I purchased a 1990 190E 2.6 I6 several months ago for back and forth transportation. I have recently noticed that what seems to be a lot of condensation is left on the driveway when I leave the car idoling. Is this typical or do I have a problem? I’m no motor expert but is it
|
| 1980 450sl | 07 May 2005 02:29 GMT | 3 |
I HAVE THE KEY, THERE IS A PAPER CLIP SIZE HOLE. CYLINDER STILL FROZEN. WHAT'S THE TRICK?
|
| Help whit 190E | 06 May 2005 22:12 GMT | 9 |
I have a 1984 W201 and how do I take the stitch off the right side morrow
 Signature Venlig Hilsen Greetings
|
| MB Parts prices | 06 May 2005 18:00 GMT | 4 |
Every time I go to my local MB stealer I get another shock on parts pricing on older models. The cruise control module for my '81 300D is over $900 and is nothing more than a single component board. Anyone know where to get one of those testers that simply plugs onto the 10-pin ...
|
| FOR SALE: 30 day old E320 CDI , 100,000 miles | 05 May 2005 20:47 GMT | 16 |
( Not really ... ) http://www.daimlerchrysler.com/dccom/0,,0-5-7145-1-488422-1-0-0-0-0-0-9-0-0-0-0- 0-0-0-0,00.html Stuttgart, Germany / Laredo, Texas, USA, May 02, 2005 The new Mercedes V6 CDI diesel engine, set to replace the existing five
|
| Good service MB Park Royal | 05 May 2005 18:07 GMT | 4 |
I have to give credit where it's due. As I had run over a kerb I was concerned I had damaged the underside of my car. Last week I called my usual service point to ask when I could bring the car in to get it up on an hydraulic ramp. "Within the hour." I duly
|
| '05 C220 CDi SE Avantgarde Auto | 05 May 2005 17:55 GMT | 10 |
As the subject says, do you own one of these or have you owned one? Any feedback good or bad. My wife and I test drove one today an Ex demo model that was 3 months old and we were very impressed.
|
| Removing CD /Radio unit | 05 May 2005 17:13 GMT | 2 |
Can someone tell me how to remove the CD/Radio unit in the current C class - it's an Audio 20 unit. Thanks in advance Aidan
|
| Clunk in E320 4matic | 05 May 2005 07:31 GMT | 7 |
I have a 2001 320 4matic with 14,689 miles on it (recently purchased) and when I take my foot off the gas and coast for a few seconds and then apply the gas I get a slight clunk in the back. And, when rolling to a stop, as the car downshifts into 1st gear I ocassionally hear a ...
|
| Any opinions on the 80's r107 SL280? | 04 May 2005 20:22 GMT | 4 |
I might like to get an 80's R107 SL 280 one of these days, for long trips, are they pigs on gas? At 188bhp I figures it's got more power than I can handle... do they have the m110 engine? cp
|
| C230K and C320 =?ISO-8859-1?Q?SportCoup=E9?= | 04 May 2005 19:01 GMT | 8 |
I am interested in purchasing the 2005 C230K or C320 SportCoupé later this summer as Mercedes-Benz is omitting that model from the US market this year. I need something small with three-point star! I I drove the 2003 model and liked it very much. They're pretty popular here in ...
|
| "World Record for Mercedes E 320 CDI" | 04 May 2005 11:03 GMT | 1 |
I wonder if all the electronic knick knacks held out http://www.daimlerchrysler.com/dccom/0,,0-5-7145-1-488422-1-0-0-0-0-0-9-0-0-0-0- 0-0-0-0,00.html cp
|
| Need engine for 97 E320 | 04 May 2005 07:31 GMT | 6 |
Does anyone have a few names and numbers for an engine for a 97 E320? Had an oil leak and the car overheated. Now the mechanic is telling me it is better to replace the engine instaed of trying to rebuild the engine. Any suggestions? Don't tell me I am screwed!
|
| 300D transmission vacuum valve | 04 May 2005 05:31 GMT | 3 |
Anyone know how to check to see if the transmission vacuum valve mounted on the injector pump is good or not? My wife's 300D shifts rather erratically and I'm thinking this might be the problem. I put a new modulator valve on the transmission but that didn't help. Vacuum gets to the ...
|
| 240d primer pump leak | 04 May 2005 05:28 GMT | 3 |
I changed filters today and used the pump to prime the filters. It started to leak while pumping and continued after I started the engine. Can this be rebuilt or does it have to be replaced. It's an 82. Chris
|