| Thread | Last Post | Replies |
|
| New Site for Shop Equipment | 28 Feb 2006 22:35 GMT | 2 |
Come on in and check out our new website at [www.stqandardus.com] We have vehicle lifts, lubrication equipment, jacks, workbenches...exhaust hose, etc.... We are always looking for feedback on the site...Please let me know what you think! [www.standardus.com]
|
| 1972 280SE 4.5L Wanderer | 28 Feb 2006 22:03 GMT | 8 |
The subject car has 140k miles, was leak free, & rode on rails until a couple weeks back. She developed a power steering fluid leak, I believe from the steering box, & began to wander.
|
| 24 mpg S 550 | 28 Feb 2006 21:44 GMT | 2 |
The mpg might be good enough for McBrue...... http://www.washingtonpost.com/wp-dyn/content/article/2006/02/23/AR2006022301329.html
>From the First Caress, a Luxurious Ride By Warren Brown
|
| Changing battery -- what happens to electronics? | 28 Feb 2006 06:09 GMT | 4 |
When the battery is removed, obviously the radio and memory seats are affected, but what other electronics are impacted? Anything that can be reset, or needs to be reset? Thanks.......
|
| W124 - Wierd ABS light prob | 27 Feb 2006 20:15 GMT | 6 |
I have a 1994 W124 E220 Estate I have a weird problem with the ABS light, I will describe the symptoms. 1. Start car, ABS system passes all diagnostics and light goes out. 2. I drive for about 1/2 Km, and ABS light comes on and stays on.
|
| Original Mercedes Benz Wheels. | 27 Feb 2006 16:08 GMT | 5 |
Can anyone tell me what is the best product available to clean these original wheels that i have on my 300SD 1983? The brake dust and everything is stuck on so hard i just dont know what to do anymore. Regards
|
| hood release on '85 MB 300D | 27 Feb 2006 15:24 GMT | 4 |
The inside release on my 300D is not broken, but it pulls all the way back and the hood doesn't pop. This is obviously something of a problem. can anyone tell me how to get the hood open without using the release? thank you.
|
| W201 (190e) Brake Pad R&R | 25 Feb 2006 18:42 GMT | 2 |
this is the first time I'm doing the front brakes on my 190. A quick inspection revels the caliper assembly to be quite different from my 300e. The 190 appears to have a floating single piston caliper. Anyway, do I need to remove the 19 mm nuts top and/or bottom, or do I simply ...
|
| Power Steering Fluid | 25 Feb 2006 14:57 GMT | 2 |
Since owners manual suggests "use only MB steering fluid" would like to know what available product to use for '96 SL500?
|
| 300SDL Door Problem | 25 Feb 2006 14:53 GMT | 6 |
The left-rear door of my '87 300SDL started making a "graunching" sort of noise when I closed it awhile back. It sounded like the hinges needed to be greased. I figured I'd get to it in due course. It wasn't terribly
|
| No Spare Tire in My New 2006 CLS500 | 25 Feb 2006 12:56 GMT | 3 |
Before I call my salesman tomorrow are Michelin Pilot HX MXM4 tires considered run flat? I didn't think they were. In looking at my wheel well though, it looks as if there never was a
|
| 1999 c280 broken front Axel | 25 Feb 2006 05:12 GMT | 2 |
I was invovled in a hit and run and I think my front axel is broken, both of my tires are facing opposite directions. I am waiting to hear from my insurance company but is this repairable? I have heard that when an axel breaks they usually pay you the trade in value and that is ...
|
| servo | 25 Feb 2006 02:56 GMT | 2 |
I have bought a 79 300td and i'm having all of the problems at once glow plug.heater.rear height adjutment valves. live in minneapolis so cold start stugg the problem now is no heat just fan on def were do I start to look
|
| Left Outside Mirror - Replaceable? | 24 Feb 2006 06:50 GMT | 3 |
My driver's side outside mirror has some kind of creeping tarnish on the back. I understand that there is some kind of antiglare chemical on the back that fails when the sealed edge of the mirror looses its integrity. Question is, can this be fixed/replaced, how is that done & ...
|
| How can I identify tranny on 123 if I know the # on engine. | 24 Feb 2006 04:31 GMT | 2 |
Anyone here who have seen a table on www, that could tell which tranny fits to which engine on all 123 models. Eg if I have the engine 917.957, what model is the tranny? Would be nice to have such table to check if doubt when order parts or
|