Car Forum - Mercedes-Benz Cars

Thread preview

Thread	Last Post	Replies

190d with water in transmission	17 Jun 2006 20:57 GMT	9
Bad things can happen to good people. I bought a 190d recently. The previous owner said I would be able to drive it home, nearly 300 miles, but common sense prevailed and I trailered it. Upon arriving I discovered that the trans cooler line was looped back
manual w210	17 Jun 2006 20:26 GMT	1
i need it, can you help me?
Airflow Sensor Plate Position	16 Jun 2006 20:35 GMT	1
On a W124, KE Jetronic, Which is the correct rest position of the sensor plate, vertical and laterally? If its position is incorrect, how can I adjust it? Thanks
A/C CLIMATE CONTROL UNIT PROBLEM OR MORE	16 Jun 2006 19:46 GMT	8
Have '91 MB 420 SEL with failed A/C problem. Replaced Climate Control Unit & A/C Relay and still compressor doesnt kick in nor blower. Checked & replaced #5 Fuse with New One.............back-up lights is in this group functions & the lights come-on with gear shift in
Help E200 mercedes AC 1999 model	16 Jun 2006 19:24 GMT	2
Can anyone give me some tips? My climatronic has ceased working! What could the possible causes be? Thanks in advance!
Radiator neck broke	16 Jun 2006 18:12 GMT	7
Hi all, I know that the broken radiator neck is a common problem. Seems though that I've still got an inch or so of neck left which I've clamped the hose onto. Is there any problem with this that I'm not aware of? Appears to work allright.
Transmission fluid cooler leak in C230	16 Jun 2006 13:59 GMT	17
I've got a 2002 C230 Sports Coupe with a potentially expensive problem. The car has had way too many problems in the past, mostly electrical in nature, plus an impressive assortment of plastic trim pieces falling off of various parts of the car. First year, it was in the shop ...
Number plates	16 Jun 2006 10:17 GMT	13
I have noticed that the front registration plate on my 2004 MB is held in place only by bits of double sided sticky tape. This might look neat, but is it secure? Surely anyone can rip it off.
replacing vacuum modulator?	16 Jun 2006 00:32 GMT	5
IS there any adjustment required when installing a new vacuum modulator? mine was perrished and allowing trans fluid to be sucked into the engine. 1979 6.9
190e Service Manual	16 Jun 2006 00:23 GMT	7
Does anyone have one of these or at least know where I can find one? Its for a 1993 190e
Child seat in SLK	15 Jun 2006 23:41 GMT	8
Does anyone know how to fit a childseat in a SLK230? There is an airbag inhibit light on the console but what does it take to get it lit? Thanks
83 300 SD rear suspension	15 Jun 2006 21:55 GMT	11
I have an 83 300 SD. I have noticed that the rear end seems to be drooping and since I am parting out an 81 300SD that doesn't appear to have this problem, I was wondering the best way to deal with this. Looking at the underside, it appears that the rear is supported on a
Upgrading 1997 E300D headlights to projector	15 Jun 2006 19:48 GMT	10
Has anyone had experience in upgrading the headlights on a 1997 E300D? Mine are getting a bit cloudy and I am thinking about replacing the OEM with the new euro-style clear projector types. What manufacturer would you recommend? Thanks!
"Euro" model MB 1983 300D (not turbo)	15 Jun 2006 18:12 GMT	6
Anyone have any info. on this model. Considered grey market model. Nothing automatic (i.e., door locks, windows, etc.) except transmission. No sunroof. Thanks.
Brake lights not working 1983 300D	15 Jun 2006 18:08 GMT	8
The brake lights on my car stopped working last week. The bulbs are still good, and all of the fuses are still intact. All other lights work fine, including the tail lights, blinkers... Any ideas?