| Thread | Last Post | Replies |
|
| 1985 300TD, how to check if turbo is kicking in | 17 Sep 2006 08:55 GMT | 1 |
My 1985 300TD seems to lack the acceleration it once had - I do not feel the turbo come on at 2,000 rpm like before. Is there a way to test the system to see if it is working? Thanks,
|
| Alarm going off on its own?? | 17 Sep 2006 03:51 GMT | 2 |
Here is another problem with my gem(1994 e420). Alarm will go off on its own and I have to run outside and turn door lock to shut it off. Whether this is related or not: when I turn the door lock(driver side) the lights(battery,abs,check engine etc) all come on on the dash and the
|
| How do I check codes?1994 e420 | 16 Sep 2006 18:01 GMT | 14 |
My car is running good now that I cleaned the distributor caps and put in new plugs but it idles too high. It is idling around 1300-1400 rpms in park and doesnt kick down. The old plugs I pulled out were really black and someone down the line pulled out the bulb for the check ...
|
| Dash Light Problems revisited | 16 Sep 2006 17:24 GMT | 2 |
Hi,This is a repost which I hope is ok, basically the lights in the instrument cluster on my 1987 W126 300SE do not seem to work, neither does the light that would normally illuminate the gear lever. The consensus is that whilst the bulbs themselves may have gone, the
|
| Adding turbo to '81 300D | 16 Sep 2006 07:17 GMT | 5 |
Hey Tiger, TG, anyone else with good info. What do I need to do in order to add a turbo to a "straight" 300D?
|
| turbo in a 81 300cd | 16 Sep 2006 07:13 GMT | 3 |
can i put a turbo from a 300d in a cd? i think i can but mabey somebody knows if its a definate yes or no
|
| Spare tranny from W126 or 123? | 16 Sep 2006 07:08 GMT | 3 |
Hello, I just bought an '82 300D for WVO conversion and it has a bunch of extra parts, including a transmission. The owner says he parted out a 300SD and got the tranny from it. But the 300D doesn't appear to use the same tranny, at least what I've found on the 'net. How can I ...
|
| 560sel hydraulic pump | 16 Sep 2006 01:42 GMT | 1 |
I have developed a leak in the hydraulic pump of my 560sel 1989 model. How difficult is it to remove the pump and replace it[I am a shade tree mechanic] or should I take it to the MB dealer.
|
| CDN US price differential | 15 Sep 2006 17:47 GMT | 3 |
Can anyone take a stab at why the '07 E320 CDI base price is US$51k in the US and CDN$67.5 in Canada, with the exchange rate around 10% and has every sign of being stable, if not decreasing in the future cheers, guenter
|
| 1989 300TE / looking for owners manual | 15 Sep 2006 16:16 GMT | 1 |
purchased a 1989 300Te , w/o owners manual, does anyone know where i can get one ? already tried ebay.....thanks.
|
| key won't turn. wheel seems locked. | 15 Sep 2006 16:06 GMT | 6 |
I can't get the key to turn on my 83 turbodiesel. door locks and trunk are fine - key works. What do I do? Do I have to get it towed? help please.
|
| What can I do with an intrument cluster from a 2004 SL500 | 15 Sep 2006 15:59 GMT | 4 |
When importing an SL500 from the US to Canada, the instrument cluster must be replaced by one with the speedometer marked in kilometers It's cost is about $2,000. Now I have a cluster with only 10k miles and have no use for it.
|
| 86 300E & 300SL SERVICE | 15 Sep 2006 14:40 GMT | 4 |
I am taking my 1986 300E in for service at 135,000 miles and the 300SL in at 45,000 miles. My mechanic says not to replace the fuel pump relay until it or the fuel pump goes bad since when the fuel pump goes bad you will need to replace the relay again. Any thoughts on how to ...
|
| chassis code of the 1987 260E ? | 15 Sep 2006 14:38 GMT | 2 |
How do I go about determining the chassis code of a 1987 260E ? I need it to order the correct replacement parts off the online stores. They asked to choose from these but I have no idea what the chassis code is:
|
| 1983 300 D mercedes | 15 Sep 2006 07:55 GMT | 10 |
My tape deck, radio, anntenna and signal lights will not work. The fuse blows immediately when replaced. Any electrical schematics for this car? Would they help?
|