I read somewhere that this may need just a cleaning rather than replacing
when they generate an error code. I removed the sensor from the housing to
take a look at it and it looked clean. The piece that is actually protruding
inside the housing looks like a printed circuit board, ...

A dealer told my friend all four rims on his 2006 CLS55 were bent.  How
likely is this to happen in normal driving?
I have a C32 and have driven mine on less than perfect roads in Boston,
Houston, I-10 through Louisiana, Mississippi and Florida and never a

I'm trying to replace the speakers in my 190e but cant figure out how
to get them out. Anyone out there have any idea on removing the rear
and dash speakers in a 1993 190e. I can get the grills of the ones in
the rear but not the ones on the dash. Any help will be appreciated.

My '82 300 TDT was running great.  Set cruise at 82 mph all the way
across Arizona on I-40, 28 mpg.
I'm back home, but now it won't start.  This started at the motel in S.
Utah before crossing AZ.  It was 45 degrees and took a jump start to

I recently bought a used 1987 260E sunroof.   Anyway, today I was
stupid enough to open the sunroof, and once open it won't close.  Car
is parked outside, and its gonna rain tonight.  I don't know what to
do.  I don't have a user's manual when I bought the car.  Is there

Which is the best engine coolant to use? I vaguely remember reading that
Mercedes' own coolant is not the best - or did I get that totally wrong? Is
Zerex G05 the one to use?
Thanks

I have a c250 TD and whilst driving last week the glow plug heater
light on the dashboard came on.  Does anyone know what this indicates?

My car is '97 C180.
Recently, when the engine is started, a continuing sizzle comes out from the
interior lighting cover, the sizzle won't stop until the engine is off. I
shall be grateful is someone could tell me what is wrong and how to fix it?

There are two screws that hold the mass air flow sensor into the housing on
my 96 E320, I thought they were standard tamper proof torx screws, but there
not. Does anyone know what kind of screws these are and the head size?
Thanks,

There are two screws that hold the mass air flow sensor into the housing
on my 96 E320, I thought they were standard tamper proof torx screws, but
there not. Does anyone know what kind of screws these are and the head
size?

http://www.telegraph.co.uk/money/main.jhtml?xml=/money/2006/11/08/cnschef08.xml
German bankruptcy laws drive car mirror firm to UK
By Ambrose Evans-Pritchard Last Updated: 1:00am GMT 08/11/2006
Schefenacker AG, the world's biggest maker of car mirrors, has moved

Ouch $340.00 plus tax              Just my final comment on my message to
the group with my  problem with  lug bolts ,even when  torque.properly ???
Visited my local Merc dealer  today ,to remove broken wheel  lug  bolt.
Front axle hub $145.00.

I'm trying to replace the speakers in my 190e but cant figure out how
to get them out. Anyone out there have any idea on removing the rear
and dash speakers in a 1993 190e. I can get the grills of the ones in
the rear but not the ones on the dash. Any help will be appreciated.

Ok
I have a starting problem, observed I must say (now I think about it)
when cold.
It doesn't like to start when its cold. Occaisionally it fires, but

I've been driving my 82 y./o Pops 300e ('86, 190k miles) for a few
weeks.
The car started and performed great the first couple of weeks.
The car has since developed problem which is becoming a safety issue.