Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Mercedes-Benz Cars / December 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
'80 300D / Changed Glow Plugs now it can't shift into 3rd gear04 Dec 2006 13:27 GMT15
Hi all, I have a 1980 Mercedes 300D  Diesel Automatic. I'm also a
newbie at repairing it myself and decided to make it my project car.  I
recently had problems with it starting up on cold mornings. I did the
standard replacement of the glow plugs and it has been starting up
swap 83-80 240d04 Dec 2006 01:38 GMT2
Hi, I just joined after searching for information on 240D engine
interchangeability. Compression on my 80 240 had gotten to the point
that starting was long and painful, ~235lbs. :>(  I purchased a used 83
motor and trany with good compression. I have noticed some additional
oil comsumption E32004 Dec 2006 00:39 GMT6
On my recent 1000 mile trip  at speeds  73-80...My  e320 (95000mi)used 1 qt
Mobil 1 synthetic oil.This seems higher than in the past? or is this normal
for engine  of this mileage? Thanks for comments
Sunroof Pan03 Dec 2006 23:39 GMT1
'81 300TD.
I knew this car had rust probs when i got it, however i didn't expect
to find the sunroof pan turned to powder. i pulled it out and put in
the pan from my wrecked DT. Nice fit. However, the pieces to lift the
300E Tie Rod Question03 Dec 2006 23:27 GMT3
Hi Everyone...  Ihave posted here many times in the past and found the site
to be great help.  I have a 1989 300E. The car had a few bugs that I have
been able to get fixed over the past several months.  Yesterday I had to
get new tires.  I got Falken 205ZXs...I thought 300 bucks ...
Pls help...6 cyl or 8 cylinder Luxury autos ?03 Dec 2006 15:20 GMT1
Pls help...6 cyl or 8 cylinder Luxury autos ?
My sister in California is thinking of buying a "used" Luxury car /
sedan  around 5 years old  like a Mercedes or Lexus.
She is confused as to  the  gas mileage  for 6 cylinder  and 8 cylinder
BAS/ESP and ABS lights on after battery replacment02 Dec 2006 20:57 GMT1
with replaced battery how do I reset these dash lights?  Thanks
73 450sl electronic fuel injection02 Dec 2006 06:10 GMT2
is it possible that if the vacume advance is not working it could cause
flooding?
Heated Seats02 Dec 2006 05:17 GMT1
I recently purchased a '99 E320 with heated seats.  Question, does just the
seat bottom heat, or does the seat back heat as well?  Right now only the
seat bottom heats up on my car, and I'd like to know if I have a problem to
root out.
Discount Mercedes parts in Dallas/Fort Worth?02 Dec 2006 01:39 GMT2
Looking for a good source of Mercedes parts in Dallas/Fort Worth, Texas.
Fuel pumps, engine mounts, etc. Do not wish to pay the high price at the
Mercedes counter.
Web suggestions would be welcome, too.
300TD - Problem with dreaded Servo based Automatic Climate Control System02 Dec 2006 01:12 GMT5
I have a strange problem with my 1980 300TD ACC with the Servo based
system.
First of all, all the major components have been changed (Servo, amp,
etc).  Servo runs fine through hot/cold, holds temp well, etc.
Every day my Sprinter gets more expensive01 Dec 2006 22:17 GMT8
With the dollar dropping fast against the Euro and Pound, the Sprinter
I want to get
has to be getting more expensive.
.
Bosch Rebuilt Starter Problems???01 Dec 2006 18:05 GMT6
My 380sl wouldn't  start in P or N a couple of weeks ago, even though
the battery was good and the usual dashboard lights came on when I
turned the key. However, it started right up after i wacked  the
starter. So, after a lot of difficulty getting the top bolt out,  i
NSS Issue01 Dec 2006 14:24 GMT1
Want to thank everyone who weighed in on my Neutral Safety Switch issue
I was having on the '95 MB.
Finally got up enough courage to take the beast to a mechanic ($$$$$$)
and it is now thought that the problem is that the bushings that hold
Pages: 1 2 3 4 5 6 7 8 9 November, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.