| Thread | Last Post | Replies |
|
| A160 Problems..Can anybody please help !! | 21 Jan 2007 23:58 GMT | 1 |
I would appreciate any help / advice on the following :- 1) Over the last month or so My CD / Radio has started switching..So if I’m playing a CD suddenly the radio comes on instead. This has been happening 1 or 2 times a week.
|
| 560 SEL suspension conversion to air shocks | 21 Jan 2007 21:24 GMT | 1 |
I have a 1987 560 SEL and am tried of the costly repairs on the Hydropneumatic rear suspension. On this modle the shocks run through the rear coil springs. Would it be possible to fit a set of air shocks (so I can adjust the height)
|
| 1982 300CD's Bum Deal = Bum Wheel | 21 Jan 2007 18:44 GMT | 4 |
My left rear wheel was hit perpendiculur by a Saturn doing 25-30mph, resulting in a permanent 20 degree positive camber of that wheel only. The drive train functions fine, tho handling is poor from misalignment. What's the likely cause?
|
| New C class online | 21 Jan 2007 18:41 GMT | 1 |
http://www.spiegel.de/fotostrecke/0,5538,18684,00.html
|
| ML270 2002 Hard to start when cold | 21 Jan 2007 11:04 GMT | 10 |
When starting car first time in the morning..... it takes between 6 and 10 attempts before the engine fires into life. Engine turns over once the key is turned on and released. But this takes as mentioned about 6 or 10 tries before the engine actually
|
| E300D Diesel (OM606) fuel leak | 21 Jan 2007 05:23 GMT | 2 |
I have a 1995 Mercedes E300D diesel with the OM606 engine which has a fuel leak. The leak is coming from the "quick disconnects" that connect the clear plastic fuel lines to the lift pump. These connection points apparently have o-rings that rot out and cause leaks.
|
| Small white knob in trunk | 21 Jan 2007 02:19 GMT | 1 |
Sorry to be so stupid, their is a small white knob on the left side in the trunk, behind a flap. Its a 1991 190E 2.6. Just wondering what part it plays. Thanks in advance, Ken
|
| 1998 C230 Interior Electrical Light Problems | 21 Jan 2007 02:18 GMT | 2 |
I don’t know why but the sealing switches for the interior lights aren’t functioning right. I press for rear light and it doesn’t turn on - but by itself maybe a day later? I press for the open door lights to come on but they act as the interior light switch that never
|
| Rough Idle 190E 2.6 | 20 Jan 2007 22:47 GMT | 8 |
Would really appreciate any help with the problem of the very rough idle on my 1991 - 190E 2.6, It does not do it all of the time. It starts the very rough idle only at a stop light or as I should say a real low idle of 500 RPM or less. I can give it a
|
| stalling at idle - engine dies | 20 Jan 2007 13:57 GMT | 4 |
Hi Fella's See if your great wealth of knowledge can sort this one out! I've got a 1992 merc 190e 1800cc petrol inj saloon 124 model 80,000miles an absolute peach with full history
|
| Online owners manual? | 20 Jan 2007 12:04 GMT | 6 |
Having lost my original C180 combi owners manual I would like to now if there is such thing as a online version of the manual. Any sugestions?
|
| 1993 Merc 1.8 190e Overheating | 20 Jan 2007 08:39 GMT | 11 |
I have had a problem with overheating. My 1993 Merc 1.8 190e is overheating in traffic. It is fine on a run, say on the motorway or uninterrupted driving. As soon as I am caught in traffic the temperature shoots right up. On
|
| E55 Electrical problem | 20 Jan 2007 03:35 GMT | 2 |
I have a slight power inconsistency and not sure where to start the diagnosis. When driving at normal speed and then coming to a stop at a red light with normal breaking, the engine seems to take on an instantaneous
|
| two windows in the front won`t go down. | 19 Jan 2007 20:52 GMT | 3 |
The drivers windows won`t roll down. I have taken it to the mechanic who said that he has changed the engine/motor of the door and the switch in the console to no help. its a mercedes e200 elegance. The mirrows too won`t change.Please somebody help!
|
| Regulator | 19 Jan 2007 09:32 GMT | 8 |
got an '88 230TE with electrical problems...current (haha) suspect is the Voltage regulator/brushes, anyone know the specs for brush length/wear and is there a test for the regulator? The brushes project about 10-11 mm (from holder body to curve in brushes)
|