| Thread | Last Post | Replies |
|
| Updating A/C in 300E to 134a | 30 Apr 2007 17:27 GMT | 2 |
My '89 300E of course has a leak in the evaporator, sniffer notices R12 coming out of vents, and there are probably some other leaks as well. I plan to convert to 134a. First I want to see how bad the evaporator leak is though.... if it's not 'too bad' I might simply be able to ...
|
| 300TD tuning | 30 Apr 2007 03:31 GMT | 1 |
Has anyone made adjustments to the pump or injection timing to a 300Td (mine is an 81) to gain mileage or performance, without damaging anything? California diesel has been "oxygenated" at least twice. I learned years ago to only use factory timing specs on old gas engines as a
|
| 1972 280SE 4.5L timing/vacuum | 30 Apr 2007 02:07 GMT | 4 |
Can anyone tell/reference info on the vacuum advance/retard aspects of the Starting Valve, Thermal Time Line Switch, Supplemental Air Valve, Cooling Temp Sensor, & Switch-Over Valve/relay, for the above mentioned car? It goes from
|
| TELE AID ANALOG TO DIGITAL UPGRADE | 28 Apr 2007 16:46 GMT | 3 |
Received letter from MBUSA about upgrading the Tele Aid to Digital from Analog. The Analog services expires on December 31, 2007. There is a one-time charge of Just $1,500.00 installation not included.
|
| Bedrading elektrische stoel naast de bestuurder | 27 Apr 2007 22:22 GMT | 9 |
Beste mensen, De elektrische stoel naast de bestuurder doet het niet meer. Aangezien de zitting, rugleuning en hoofdsteun het niet doen, is het niet aan te nemen dat de motoren stuk zijn.
|
| Dead Battery -- 93 300E 2.8 | 27 Apr 2007 16:40 GMT | 5 |
If I drive my 300E every day, no problems, and the battery is strong, the headlights bright at night. Let it sit for 5 or 6 days... and the battery is dead.
|
| MAF 98 ML320 | 27 Apr 2007 15:49 GMT | 13 |
Error code advises that the MAF is no good. Dealer cost $400 plus 1 Hr install. Bosh replacements on eBay are $230. Is Bosch a good replacement, is this easy to install??? I have testing tools, etc.. just screwdrivers, etc!
|
| Mysterious Vacuum Problem in 300 TDT | 26 Apr 2007 20:46 GMT | 17 |
My automatic climate control works fine a low speeds or at idle, but loses vacuum control at highway speeds. The flaps return to default position with the air directed out the side heater ports and defrost vents when on cooling setting instead of continuing to blow out all
|
| Changing Bulb (park & fog lights) on 2005 E320 | 26 Apr 2007 20:43 GMT | 5 |
Can anyone tell me how to replace the bulbs re: park lights and fog lights on a 2005 Mercedes E320? I successfully replaced the high and low beams (H7) w/ bright white PIAA bulbs. Also, what type of bulb does the park and fog lights take, H2?
|
| 190E engine swap: Opinions Wanted | 25 Apr 2007 23:42 GMT | 1 |
I bought a 190E engine to but in my 230CE. Most of it will be bolt-on. The big difference is the fuel control system. I have two choices: I can put the fuel system from the 230 onto the 190 block or I can get the computer and wiring from the 190 and add it to the
|
| '88 300TE, high idle speed | 25 Apr 2007 18:39 GMT | 2 |
Folks, I have been troubleshooting high idle speed (~1200 warn engine) on an '88 300TE. I repaired the rubber hoses to and from the idle speed motor (may not be proper name) and a number of vacuum lines, then I checked the engine
|
| 123 seat pan? | 25 Apr 2007 13:51 GMT | 2 |
i have an 81 123, 300td. I only have a bad Clymer manual. How does the front seat's lower section attach to the seat frame? I'm wondering if this is something i can swap during my lunch break at work(where all the tools are) or should put for a day off.
|
| 240d a/c | 25 Apr 2007 00:29 GMT | 3 |
I have '79 mb 240d. There used to a/c, but prior owner removed compressor. What can I do to get AC back? j.
|
| noise from roof control panel | 24 Apr 2007 21:43 GMT | 4 |
I have a new C180 Avantgarde Kompressor and there is a noise coming from the roof mounted controls (where the courtesy light switches are) this noise is constant even with the keys out of the ignition!!!. it sounds like a fan running!
|
| Engine misses above 4,000 RPM | 24 Apr 2007 16:21 GMT | 3 |
Title says it all. Battery went bad and was replaced. I was rev'ing it and found the miss. Don't know if it was there before. It doesn't seem to affect driving. Any ideas?
|