| Thread | Last Post | Replies |
|
| Gear Shift Rattle 1999 E300TD | 09 Jul 2007 15:59 GMT | 3 |
Lately I've noticed a gear shift rattle while driving at various speeds before 4th gear. The transmission shifts OK, but the rattle is starting to become a bit annoying. Does anyone know what could be cause it? Also, four new Yokohama tires were put on last Dec. At about 10K ...
|
| 300CE start problem, possibly lock-out | 09 Jul 2007 15:57 GMT | 5 |
My 1990 300CE refuses to crank when I turn the key. For a while, I could move the shift lever to Neutral, and it would start, but sometimes not. A few years ago, suffering a similar problem, I had the ignition switch replaced. It had become iffy. I also had the lockout switch ...
|
| ML320 woes, help pls | 09 Jul 2007 12:43 GMT | 6 |
98ML320- died, so I had it towed to dealer.... What brought it there, belt tensioner went, destroyed belt, that needs to get done... While there, dealer sugge$ted:
|
| '81 380 SL- double timing chain | 08 Jul 2007 19:09 GMT | 3 |
I just got it and it runs great and sounds fine at 115k miles, but no service records. My mechanic says I have a single timing chain, but he doesn't see any reason to check it from the performance and sound aspects. It will take $400 to just remove the cover to check it out.
|
| Should I buy this car? | 07 Jul 2007 22:56 GMT | 32 |
I saw this car on the net a while ago, and it really struck my attention. http://detroit.craigslist.org/car/348895239.html He is holding it for me for now. He told me it cranks over but it wont
|
| 1983 300cd A/C compressor will not engage | 07 Jul 2007 22:51 GMT | 1 |
Hello all, I have an 1983 mercedes 300cd. The a/c compressor clutch is not engaging. I have tried all the things I know. It is not the pressure switch, I put 12 volts to the compessor side of the switch and the clutch engages, all blower controls work normally. I am
|
| Turn Signals, gauges don't work 1980SD | 07 Jul 2007 22:50 GMT | 1 |
I just bought a 1980SD and the turn signals, Temp. gauge, fuel gauge etc. don't work. I checked the fuse box and I don't seem to be getting power to fuses 3,4, 6, 8 & 10. Looking at the schematic it seems that the power for these comes from the ignition switch. Is there a
|
| Instructions for enabling Video in Motion with Mercedes COMAND DVD system | 07 Jul 2007 19:19 GMT | 2 |
Here are the required steps for activating Video in Motion: ENGINEERING MODE Menu: Press Mute + Endcall + Service (all together and hold for 5 secs) ENGINEERING MODE Extended Menu:
|
| fuel pump wire | 07 Jul 2007 05:41 GMT | 5 |
1984 500 SEL euro .Car quit the other day (ran out of gas, and my fuel gauge doesnt work). I didnt think it was gas though, because I just changed the fuel filter, so I figured maybe something came loose. Nothing was, but a wire going towards the fuel pump (positive i think)
|
| Mercedes only cranks over,when I spray a little starting fluid | 07 Jul 2007 05:12 GMT | 3 |
I have a 1993 mercedes 500SEL,I had it parked for about 8 months,due to radiator was leaking,so I just installed a new one.The problem I'm having is the engine will sound like it's gonna run,and it doesn't,so I sprayed a little starter fluid and it turn over for a few seconds
|
| 1998 Benz E430 | 06 Jul 2007 15:56 GMT | 15 |
It seems that my blower motor for AC comes on sometime, but I can still hear my compressor clicking on and off when I activate the switch. what could this be?
|
| Handbrake waring light | 06 Jul 2007 15:23 GMT | 1 |
I have a n A160 avantgarde, on which I have just replaced the brake pads all round. Whilst the brakes are working perfectly, the handbrake warning light on the instrument panel, remains constantly on. I have searched around the rear discs for any cables, but have been unable
|
| 1999 w210 Fuel pump intermittant | 06 Jul 2007 10:34 GMT | 7 |
Occasionally, and more frequently as of late, the engine fails to re-start after sitting for a few minutes. I suspected the fuel pump circuit and validated this by attaching a switched buzzer to the relay that powers the fuel pump(under the rear seat). Using the buzzer, I can
|
| 123 Chassis - 240D problems | 06 Jul 2007 07:03 GMT | 2 |
My 1977 240D won't sustain a low speed idle. By that I mean that once started, the revs constantly increase until the engine is roaring. The car can only be driven by downshifting the 4 speed manual, forcing down the engine rpm's while also braking. An ungood condition!
|
| How to fold down rear seats in C200 saloon | 05 Jul 2007 20:16 GMT | 3 |
I have a C200K (W203) and can't work out how to fold the rear seats... Is there a way or did it have to be an option when bought? Cheers, Mark,
|