| Thread | Last Post | Replies |
|
| 1986 420 SEL fuel pump problem | 30 Nov 2007 23:07 GMT | 2 |
Car will not start, fuel pump is not working, there is no power at the fuel pump terminals with the ignition in the "ON" position. I'm guessing this could be a fuel pump relay. Any advise, if it is the relay, ware is it located? Thanks. Brian
|
| Lubricating Seat Rails on 107 | 30 Nov 2007 04:45 GMT | 1 |
The driver's side seat on my 380sl is extremely hard to move. Can anyone tell me the best way to loosen it up, and what to lubricate it with. Would spraying a nut loosener on to the rails do it? Thanks
|
| Troubleshooting Amp for Heater Servo | 29 Nov 2007 20:05 GMT | 1 |
I just corrected a problem with the heat on my 380sl by replacing the amp that controls the servo. Rather than throwing the old one away, however, I was wondering if anyone knew how to troubleshoot and repair the old one. I've already taken out the module's circuit
|
| '85 280SE 2.8L W126 UK introduction | 29 Nov 2007 18:58 GMT | 2 |
Hello Ladies and Gents, I thought to post by way of an introduction, I bought my MB last year from my father who wasn't using it, despite it's age its only finally crossed the 60,000 mile mark last week. It's in lovely condition and I
|
| Wires and electronic 600 SEL '92 | 29 Nov 2007 09:27 GMT | 1 |
Looking for any documents about the electronic circuits and also how to remove doorpanels. Thanx, Rico --------------= Posted using GrabIt =---------------- ------= Binary Usenet downloading made easy =---------
|
| '92 300D fuel economy expectations | 28 Nov 2007 17:55 GMT | 7 |
I'm averaging ~28mpg doing typical real estate biz driving; suburban, not much freeway. I've heard stories of 35-40 mpg, is that a bunch of hot air or do I have room for improvement? JD
|
| Polarity of power outlet | 28 Nov 2007 13:24 GMT | 4 |
I am removing my ashtray and cigar lighter as I have no need for them. I am putting in a new power outlet (old cigar lighter socket with a fancy new name) and was wondering about the polarity of the connections. I assume that the center pole is + and the case is - (ground). ...
|
| The Best Hybrid Car For You | 27 Nov 2007 21:01 GMT | 1 |
Many car companies are beginning to produce more and more cars that are not only good at using less gasoline, but are also better for our environment. With both of these issues being a big concern for many consumers, car manufacturers are presenting to the public more choices
|
| 420 1988 probs | 27 Nov 2007 20:22 GMT | 6 |
Also I have noticed that the electric front windows are inoperative, no heat on front and back windows, but motor warms up o.k. There are 2 black plastic relays on the outside firewall (about the size of the old matchboxes) that have small burn marks on their tops. Does this mean ...
|
| 280se 1978 fuel pump | 27 Nov 2007 18:09 GMT | 2 |
I have a 78 280 se I just bought the previous owner states that he replaced the fuelpump and I should run a hot wire with a toggle switch to I assume run the fuel pump The can needs work the body is solid . Any advice as to why this should be done
|
| Mercedes Criticised Over Racist TV Advert | 27 Nov 2007 13:07 GMT | 9 |
http://www.youtube.com/watch?v=QorvMRGnMa0 A blonde walks into a library and ask a jewish librarian for a fries and coke. Hilarious! I look forward to the one with the duplicitous jew and the uppity negro.
|
| 1981 300SD Rough shift into & out of 2nd | 27 Nov 2007 08:30 GMT | 5 |
This is in the 4 speed automatic. Worse when cold. It shifts so abruptly up that if I accelerate quickly it chirps the tires when it hits second. Downshift it seems to hesitate shifting down out of 2nd too long and then drops down with a clunk. Shifts to third and fourth
|
| tranny noise on 300 SD? | 27 Nov 2007 03:22 GMT | 6 |
My car is making a rattling noise when I put it into Reverse or Drive. When it's in Park or Neutral, it quiets down. Time for a trip to the transmission shop or is there
|
| rear window defroster | 27 Nov 2007 00:28 GMT | 2 |
My wife's '82 300sd defroster doesn't work, but the light does go on when I flip the switch on. I'm hoping it is a simple fuse problem. Can anyone advise? Thanks
|
| Drive shaft flex. disk | 26 Nov 2007 11:45 GMT | 1 |
Im trying to change the rear flexible coupling on my 91 300E. I have all the bolts removed but im unable to move the drive shaft foward to extract the disk. Any advise on how to get the disk out? Thanx
|