Some Mercedes have a rubber and metal disk at the front of the driveshaft
that is called a vibration dampener. Both my 230CE 4-speed and the donor
190E 5-speed have this. I need to have a drive shaft shortened for the
5-speed. The people that I talked to that will doing the work ...

Yes, I know, this topic has been done to death. But still...
What is the lowest temperature one can reasonably expect a 617 engine to
start given new glow plugs and an average battery?
Dropped to 10 F. here yesterday. It would not start. Called road

Just had the car in the garage for a new ignition lock on, picked it up
today and the SRS light is on plus when the cars in motion theres a buzzer
that makes a constant beeping, when i come to a stop the beeping stoops.
Just trying to find out if the busser is related to the SRS ...

Does anyone know where I can obtain the simulated wood trim for around
the shift lever and door switches for an 1987 420 SEL? Also I'm
looking for the plastic piece at the bottom left side of the driver's
seat.

In www.housinghouse.com you can check the quality before you pay,The
detailed information following:
1) Paypal us the UPS charges before the shipment.
2) Ship the items out.

84 300D is my car. I noticed some noise (and vibration) in the front
passenger tire and traced it to the center tie-rod of the steering
mechanism. (If you want to read more about this story I wrote that up
on my blog at dougsmb.blogspot.com)

100% Customer Satisfaction Guarantee check the quality before you pay
In www.housinghouse.com  you can check the quality before you pay,The
detailed information following:
1) Paypal us the UPS charges before the shipment.

Well, as I vaguely surmised, the bolt in the lower alternator bracket
was broken off--deep inside the channel. I have therefore given up and
made an appointment at the shop to have this extracted.
I mention this only as a follow-up to the many earlier posts, and to

After not being driven in over one month, I took my 82 380SL for some
exercise. When I started the car, I heard a strange knocking sound
that seemed to be from under the hood. I switched it off and checked
around, but could not see anything unusual, so I tried starting again.

I put a can of Rislone in my 380sl a few days ago, and I now have oil
leaking from somewhere on my engine, yet to be determined.
I was just wondering if anyone who's used Rislone had oil leaks
afterwards, perhaps because it lossens deposits on seals,  or if it's

I'm looking to put a block heater on my 82 240D No love starting at 5F
or less w/ Rotella 15W40 in the crankase. Is the magnetic better or
worse than the plug?
And the plug, where does it go on the engine?

q: what do a nigger and an apple got in common
a: both look good hanging from a tree

I have a 240 D with high oil usage that diminishes with the oil level
(as splash lube decreases, crank air dries out). Lack of an obvious
leak on the valve cover or head gasket, and the uniform coating of oil
under the hood make it look like blow by but I got some conflicting

I am trying to repair an old M230 W123 from 1976 that has a problem
where the fuse burns out as soon as you turn on the lights.
I have tried to disconnect both front lights and back lights and I
have disconnected the alternator. When I switch the lights on the fuse

In the course of changing V-belts, I have discovered the apparent
absence of the lower bolt ("screw" according to the manual, as there
is no nut.) However, I do not have a parts list to determine the
specification of the item for replacement. Any help will be greatly