| Thread | Last Post | Replies |
|
| ADIOS | 19 Mar 2008 06:52 GMT | 1 |
|
| Good independent mechanic in Houston area | 17 Mar 2008 14:45 GMT | 3 |
Does anyone have a good independent MB mechanic in the Houston area to recommend? I will be in the area and will be looking to buy a used Merc, and want to have someone able to do an inspection and look after it if it has
|
| 17" wheels? | 15 Mar 2008 22:08 GMT | 15 |
I just put a set of AMG staggered 17" wheels on my '92 300D. Some how it just doesn't feel right and the outer edges of the front tires are wearing fast almost as though it developed a lot of positive camber. should I expect better?
|
| 1979 240 D | 14 Mar 2008 15:45 GMT | 1 |
I purchased vehicle yesterday from new neighbor, great condition. Looked up bluebook value and nothing earlier than 1988 posted for value price,. How do I know besides going with price I payed to know how much to resell it. In concern that it may take money in keeping it
|
| c200 automatic no acceleration when I need it! | 13 Mar 2008 20:28 GMT | 5 |
I've been driving my 1998 c200 classic automatic for 6 weeks now and have an intermittent problem. Pulling out into fast moving traffic from stationary or overtaking on a motorway at about 55mph and nothing really happens! In the last case I was stuck alongside a lorry for
|
| Need to locate exterior part on ML 320. | 11 Mar 2008 22:37 GMT | 3 |
I need to locate a part on an ML 320, but I don't know what it's called. It's this bar that sits just in front on the front grill. Is there a diagram of a 1999 ML320 that I can look at somewhere that will tell what this part is called so that I can locate a replacement?
|
| 1987 300E Ride Height | 11 Mar 2008 16:04 GMT | 1 |
What is the preferred way to lower my 1987 300E that sits high? I don't want to give up ride quality, but it looks like a 4-wheel drive there is so much air above the tires in the wheel wells. What kind of costs . . . is it worth it for a $2,500 car?
|
| Need benz part numbers for Transmission | 10 Mar 2008 22:35 GMT | 5 |
Folks, I need a little bit of help. I have an E320 1997 automatic transmission. I may need a new transmission. Can anyone provie me wit the part number for the transmission so I can check the web for the part?
|
| C250td Oily air pipes | 10 Mar 2008 16:32 GMT | 4 |
I'm a bit concerned by how much engine oil there is in the air pipes on my 1998 c250td There's quite a bit of oil in all of the air pipes from after the air filter all the way 'round to the intake manifold so I assume it's
|
| High Mileage Diesel Injectors and Thoughts... | 10 Mar 2008 12:04 GMT | 11 |
Hey Guys and Gals, Today, I changed my diesel injectors... it has 205,000 miles on it. The job is fairly easy... just like changing your spark plugs. However, I now found my culprit in cold start idling problem and poor
|
| Hey, How do I check my MPG display? I was able to check it at one time | 08 Mar 2008 04:18 GMT | 5 |
somehow a few months in the past, and I don't remember the sequence any more. The FSS switch is the one I played with last time. Any one remember the sequence? THe manual didn't seem to cover this feature. Thanks
|
| 1997 UK W210 e230 idle speed adjustment | 07 Mar 2008 22:48 GMT | 10 |
The idle speed dropped today and it keeps cutting out which is a pain as it's auto! It will sit there and run fine out of gear - but in gear it cuts our randomly at low revs (once going though is as normal) I had a root around and can't see anything obvious to adjust it -
|
| W124 Production | 07 Mar 2008 20:33 GMT | 4 |
Hi all. I have tried to find out between what dates the W124 T model were manufactured. The station wagon. All I got this far is that the 124 model were manufactured from 1986 until 1995. But I have a E300TD from 1996... Can this be right?
|
| A-Class mystery | 07 Mar 2008 20:26 GMT | 1 |
Can someone tell me what this is? Internal turn indicator? http://www.parkers.co.uk/imagecache/file/630/archive/Mercedes-Benz/A-Class%20(05 -)/ACLASS_5DR_019.jpg
|
| Oiler Kit Problem | 07 Mar 2008 14:13 GMT | 4 |
The barbed plastic pieces in the oiler kit I recently got from the Benzin fit too loosely for me to install in my 380sl . So I was wondering if anyone has had this problem. Thanks
|