I have a 2006 C320 with Comand and I have heard that it can be configured to
play DVDs, how can I do this?

I'll be picking up the driveshaft for the 230CE 4-speed to 5-speed
conversion today. Since I had to fabricate the transmission mount cross
member I'll probably have to shim to get the proper driveshaft alignment.
The trouble is I don't know where to start on this.  Any ideas?

I have a 1987 300E.
I can hear a noise that sounds like a bad bearing in the housing behind the
distributor cap.
I took a large long screwdriver and placed the tip on the metal housing that

My turn stalk has come loose/broken. I expect I will need to remove my
steering wheel to get to it. How does the steering wheel cover come off? I
tried to gently pry the cover but no luck.
Thanks.

Can anybody offer any advice on how I might identify a part number for
the correct key to remove OEM security bolts from my 2003 C270cdi? I
went to my local dealer, who had a kit of 24 keys, none of which
fitted. They did advise me that their kit only covers current models,

My friend has a 79 300 SD.  He has a loud clacking sound as distinguished
from the normal klata klata.
The car runs fine starts easily and suspecting injectors he replaced them
with no change.

Car started fine and had been running fine except for a couple of
occassions where it did the same thing but started up right away. I
started to reverse and it just cut out, turned key on again but
nothing lit up on the dash. Nothing electrical in the car works.

Friend of mine has a 1988 560SEL body is W126.  I fix my own cars -
not Mercedes though - and therefore he asked me to take a look at a
low fluid level at a reservoir towards the front of the engine
compartment drive side.  The lid states 'hydraulik oel', which really

I'd like to thank everyone for all their suggestions when I couldn't
find a good Mercedes machanic in Toronto.
I found one and he is awesome. Turns out the back and hardest glow
plug to get to was gone and another needed cleaning for contact. He