| Thread | Last Post | Replies |
|
| 300E Fuel Distributor | 31 May 2008 23:19 GMT | 4 |
My 300E won't start. I have fuel pressure because if I loosen the fuel line to the cold start valve i get a shot of fuel spray from it. So the fuel pump is outputting. However if I disconnect one of the fuel lines to an injector and crank the engine, no gas is ejected from the ...
|
| c230 mirror --- damage or not? How to fix?? | 31 May 2008 06:35 GMT | 4 |
A close relative has a beautiful 1999 c230 with <> 30,000 miles on it. However, while getting backed out of the garage there was an error in judging distance and the passenger side mirror hit the garage door ..knocking the mirror backwards of course.
|
| radiator neck i.d. | 31 May 2008 02:02 GMT | 6 |
Hi all, well my rad hose came off again the other day with my wife driving. No good. As is, the rad neck broke about half way along so that about 1 to 2" of neck remain and in addition I had to cut about 1 to 2" off the hose since it leaked near the end. Sooo, not suprising that ...
|
| Help, Tiger! | 31 May 2008 01:32 GMT | 1 |
Some time ago, you told me which way to turn the vacuum adjustment on the transmission of my 86 560SEC to soften the shift. Sad to say, I have forgotten. Can you post again?
|
| Need help with injector system '91 300CE | 31 May 2008 00:01 GMT | 7 |
Is it possible to replace the airflow sensor plate potentiometer? I can't see how it's coupled to the injector body. No fasteners are visible.Help please.
|
| 300TD windows | 29 May 2008 15:09 GMT | 4 |
Group, I have found that I have 2 non-operational windows. The switch is not at fault. Are there common "gotcha's" about MB windows.Before I tear open the doors to check the
|
| 300TD Interior Trim Pieces | 29 May 2008 15:02 GMT | 2 |
Group, Does anyone have a source of new or used interior trim pieces for an 85 300TD? I'd prefer, of course, cost wise, used stuff. However if new isn't absurdly
|
| Hood ..here I was thinking of wheels | 29 May 2008 14:51 GMT | 3 |
Howdy, My new acquisition runs great, however now the hood won't open. I pull the plug in the cockpit, but now the thingee doesn't pull out in the grille. Had my
|
| Using Conversion Kits To Make Your Car Run On Water | 27 May 2008 18:41 GMT | 7 |
…More and more people are today using water fuel technology in their vehicles not only to save on fuel costs, but also to provide a boost to the running efficiency of the vehicle… http://tbmcars.googlepages.com/conversion_kits_to_make_car_run_on_water
|
| Run A Car On Water | 27 May 2008 17:40 GMT | 3 |
Convert Your Car TODAY to Run on Water and gas to save over 40% on fuel costs! Would you like to find out how to run your vehicle on water and stop wasting money on gas?
|
| Wheel fitment | 27 May 2008 00:53 GMT | 1 |
I just purchased an 85 300TD. Could anyone tell me what 16-17 inch Mercedes later model wheels will fit this car? I was going to bead blast and paint the stock 15in rims,
|
| Mercedes 380 SL knocking | 26 May 2008 23:09 GMT | 10 |
If anyone knows, what could be the source? I think it's the catalytic converter, but my friend thinks it's a colapsed lifter. The noise goes away when RPM is raised. Oil pressure is good even in
|
| 300SDL troubles (0/1) | 26 May 2008 01:37 GMT | 3 |
I had the transmission replaced about 55,000 miles ago and when the car was in for its last service (355, 000 miles on car) I had them do the transmmission service as well. When i first got on the freeway i could feel something strage when under full acceleration it tried to
|
| My C300 warning sensor is amok | 25 May 2008 17:07 GMT | 1 |
My warning sensor was telling me some systems weren't working, so I took it into the shop. Driving half way home, the sensor came on again. Now it's an intermittent problem. Anyone else having problems like this?
|
| Best used parts for 300SD | 24 May 2008 14:34 GMT | 3 |
The local Pick and Pull is having a half off sale this weekend and I'm getting some seats for my 84 300SD. If you were going to stock up on any used
|