Some Arab in Qatar really did a number on this on
All pics and story - http://www.jlaforums.com/viewtopic.php?p=1504194

Hi Group.
I'm selling my grandfather's 1984 380SE and was curious if anyone had
any advice on the best place to list. I'm in Ottawa, Canada, and it
would be helpful to learn if there are any clubs or groups nearby (ie.

My break lights dont work. All the bulbs are good? I have a bulb out
warning light luminated on the dash. Any advice as to where i might
look first?

Hi Group
Im thinking of buying a 270 cdi estate 2002 with about 70000 miles on the
clock
Has anyone any experience with this car. I have an old E series estate which

Dear Experts ...
I looked at my first MB today.  As above, avantgarde, estate, 2001/51, very
std spec I think.
Parkers Guide price is £8k+.  This is up for £7.3k but I think he'd take

We've had some discussions on tires here recently, but I'm curious what
people have found to be good tires for the 300TD.  Mine's a '79 123
body.  It has Michelin Xs on it now, ancient I'm sure and I just noticed
the belts poking through on the inside edge of one of the fronts.

One of my tires has a slow leak... it will lose about 10lbs over 2 weeks,
another 5 over the next 2, and then remain somewhat stable over the next few
months...
No hole to be found, valve seems Ok.. maybe the rim?

Does anyone have a picture of the location of the oxygen sensors on a 1999
ml320? Im looking for "Sensor bank 1 sensor 2".    I have 4 trouble codes
all leading to that sensor.
-DVSOG

Appreciate any ideas regarding driver door handle.  Just went limp,
lost the linkage I presume that connects to the lock release.  Is this
a big job to fix or something that can be done relatively easily.
Don't want to get sucked into MB Service.  Thanks!

Great old car...sentimental family history...belonged to WW2 grandad,
has driven San Francisco to Maryland (where it now is). It has rust on
edges of wheel wells and front floor (seams), so it is probably a
parts car but it could be a project...it is a treat to drive.

The rubber pad on the rear bumper of my '82 300CD-T has lost its
ability to stay attached, and I have some questions about replacing
it. When the bad pad is removed, the driver's side of my bumper has
"female" slots for the "male" protrusions of the rubber pad, some of

I am replacing the AC compressor on my 300D with a NEW unit (not used
or rebuilt).  The instructions are poor that they provide as the
proper way to set up the system.  I installed a used compressor about
4 years ago, but the shaft seal is now leaking.  When I installed that

1983 249D
Hi Experts,
I was about to change my air filter when I saw
lots of very black oil spots on the filter.

I like to get your feedback, like do you like in a hot area?  Up
and down hill often?
Thanks so much.

just testing