I have a 300ce 1990. Great car but I have been having a problem with the
windows. They won't roll down. Sometime's, when it's cold out, they will
work sporadically. But when it's warm out, anything over 60 degrees F, they
don't want to work anymore. I've checked and replaced the ...

On my '92 300D occasionally upon braking the burned out bulb indicator
light activates. I've had someone else hold the brake while I look for this
phantom bulb to no avail. Today it did it and on a whim, turned on my
headlights. Voila, the indicator went out. What's up?

http://www.foxnews.com/story/0,2933,410263,00.html
You can't help but wonder how many of these other 'recollections' are total
bullshit also.
** Posted from http://www.teranews.com **

Right hand side mirror glass replacement is my problem. The manual says t
remove a "C" shaped clip after springing the mirror unit forwards agains
the spring. There is no such "C" clip evident in our car. There must hav
been a model change and a new procedure to be followed in order ...

My 240 if in great shape both interior and exterior with two
exception: First, the carpet. There are two strips along the outer
edges of the  driver's and front passenger's foot wells that are bare
of carpet. My car is the mustard yellow color with the tannish

Hi. Can anyone advise on how to troubleshoot this problem?
Cruise Control lever accelerates when lifted and decelerates when
dropped. It does not stick to any speed.
I don't know what components make up the cruise control, especially

need help ! I can't open my hood, the cable broke! is there a way to open
the hood? I would appreciate thank you

In a wrecking yard I found a crack-free black dash board. I got it to
replace the very cracked blue dash in my car. While prepping it for
painting, I saw that the texture was different from any other W123 dash that
I have seen. It has small bumps like lizard skin rather than the ...

some of you may be interested in my little experiment.  I used 87 octane in
my B200 for a tank and noted that my average gas usage was 7.0L/100km I then
did virtually identical driving using 91 octane (which I'm supposed to use)
and found that my milage increased to 6.4L/100km for ...

I just finished installing the engine and found a new problem that
didn't exist before I started the project.  The engine will not start
unless I "prime" it with a little gas poured into the intake.  It will
immediately stall unless I feather the throttle and keep the RPMs

I'm sure you must of heard about running your car on water by now.
http://carwithwater.googlepages.com/build_a_hho_generator

Hey Everyone,
   For some reason, I decided to visit mbusa.com for some information and I
ended up seeing this...
http://www.classictechlit.mbusa.com/MB/category.asp?Page=1&catalog_name=Retail&c
ategory_name=1009

I'm going to check the injection timing and replace the nozzles on my
1980 300SD, 617 engine.   What wrench have folks been using for the
17mm connection where the injector piping meets the injection pump?
I've seen a special Hazet socket type wrench made for the purpose,

If the AC in my 1982 240D is working I sure can't feel it.  At least not
much cold air is coming out.  I took it to my local mechanic who will check
it out.  But he said that since it uses old coolant it would probably have
to be "converted" if there's a problem.  Does anyone ...

I had a 1981 300D from 1991 to 2005, and I put 244,000 miles on it.
Great daily driver, but I did not want to cough up for engine work
(seals were shot) so I sold it on eBay.  Also, larger than I want.
My current daily driver is a 2000 Dodge Stratus with the 2.5L