| Thread | Last Post | Replies |
|
| Very simple timing question | 31 Aug 2003 23:38 GMT | 5 |
If I grab the dizzy when the engine is running will I get electricuted? :) Please, no kidding, I had a bad experience with a spark plug wire once... :(
|
| Mini-related Physics paper. Help? | 31 Aug 2003 07:49 GMT | 2 |
Ey up, would anyone be able to tell me or point me to somewhere I can find the dimensions for the various Mini braking systems? I'm doing a Physics paper on technical measurement, so I'd like to try and get the fluid pressures and
|
| Cost of repair/maintenance | 31 Aug 2003 03:08 GMT | 1 |
I am wondering about the availabilty of parts and the cost of repair/maintenance if one purchases a restored Mini in the U.S.A. As I am not mechanically inclined, where do mini owners go to service their vehicles?
|
| Rear Subframe Replacement | 30 Aug 2003 08:07 GMT | 2 |
The old 25's just come back from a visit to the local AA Service Centre for a checkover before going off on The Italian Job run at the end of October and, amongst other things they've described the rear subframe as "heavily corroded, dangerously thin and breaking up". All this less ...
|
| Q: Cooper gearbox | 29 Aug 2003 23:29 GMT | 1 |
I now hav found a decent Cooper, 98, rust free but with, as the pre owner states, the synchromesh of the second gear to be repaired. The car has 43k km which is, ah, 27k miles on it. Is the possible snychromesh problem possible or can it be another
|
| Starter motor wiring, Metro 1275 into 1981 1275GT | 29 Aug 2003 19:05 GMT | 2 |
Hi All, I am fitting a 1275cc metro engine into a 1981 1275GT and wanted to know how to wire up the starter motor??? I notice there are 2 terminals on it rather than 1. Also, how do I plumb in the existing heater as I notice their is no hole in
|
| where's the battery positive? | 29 Aug 2003 00:20 GMT | 4 |
as said in previous posts I'm wiring up a pair of spotlamps. I'm pretty sure on how to do the job, but I'm missing one point: Where and how do I pick up the battery positive? I've looked around under the bonnet and found a couple of thick brown wires which hook up to the starter ...
|
| Union Jack Roof Decal For Sale | 28 Aug 2003 13:38 GMT | 3 |
Hi all, i have a union jack roof sticker set for sale, will post to anywhere in the UK, ?40 or near offer. Cheers Andy
|
| 7" disc assemblies | 28 Aug 2003 08:55 GMT | 9 |
Does anyone have a link to more information about 7" disc assemblies or know anything about them? Cheers,
|
| Buyers guide? | 27 Aug 2003 23:00 GMT | 6 |
I am looking for a buyers guide for late 90´ Cooper, or any buyers guide for any Mini. As a owner of some british cars I know about their supber build quality, so I suppose that there just has to be a buyers guide or something
|
| Italian Job on the telly... | 27 Aug 2003 19:44 GMT | 1 |
Anyone realise it was on? Some anorak info..... Teenage Robert Powell appears, as does Alfredo whats his name the traffic controller, more comonly known as
|
| Rust remedies? | 27 Aug 2003 17:50 GMT | 8 |
Can anyone help me with a certain rust remedy/prevention product that has been mentioned in the Mini magz a few times. I believe it's called something like Zinc Oxide Primer I think. Basically I want to rust proof my Mini, but I'll need to drill holes in the
|
| Distributor | 27 Aug 2003 10:27 GMT | 3 |
Recently bought a 1969 998 cooper engine and I want to install it on my 1991 mini. Will my 1991 distributor fit and work on the 998 cooper engine? I fitted an electronic ignition kit to this distributor and I don't really want to go back to the contact breaker points.
|
| sidedraft vs downdraft webers | 27 Aug 2003 08:20 GMT | 10 |
I'm trying to find a second hand 45mm Weber at the moment (in Australia) and there aren't many around except at very high prices. new ones seem to be around $675, with manifold, linkages and filter closer to $1000 which is more than i hoped to spend...
|
| How to wire spot lamps? | 27 Aug 2003 07:03 GMT | 2 |
I've fitted a pair of sportlights to my mini for that "cooper" look. They've been fitted for months now and I think it's time to connect them to the power so I can at least switch them on! :) The problem is I have no idea on how to do this. What kind of switch? do I
|