I am in the process of removing the front wheel bearing to renew them.  I
have got the hub off have removed the old bearings and the outer race from
the outside of the hub.  The haynes manual says just tap it out which i did
on the outside but the inside has a ring fitted (the oil ...

Hello to all
I saw your opinions about the BMW new mini. And what about the metro Van Den
Platz? Do you consider the metro as a mini?
ph

Folks
Thanks to all who contributed to my gearbox interchangability
questions.  Following this, what should I definitly renew on the
gearbox and what should be carefully checked prior to reassembly.

Howdy
i have 2 mini engines, a 998cc (99H791PZ522581) and a 1275cc unit
(12H706AA33121) from a GT.  I want to recon the 1275 gearbox for the
engine rebuild and am about to strip and rebuild.  My question is

I shouldn't need to ask this but:
What size socket/spanner do I need for the nut on the flywheel of a 1978
1275gt?
I forgot to buy one before starting to take my engine apart :\

I'm interested in a new project - has anyone any experience of fitting a
v-tec engine into a scamp or a moke. I know that there are clubmans with v
tecs but I fancy a no doors no roof  no sense type of car...I think i'm
trying to get something out of my system...I sail catamarans as ...

I've just bought a 1994 1275 carb Sprite.
The car is in very good order and low miles.
But...when driving the ignition light sometime comes on and I lose the
indicators and temp and fuel gauges. Plus, sometimes when starting,

I HAVE A MINI THAT I LOVEINLY PUT A 13 HUNDRED MG METRO ENGINE IN AND ALL
WAS FINE UNTIL IT HIT THE FLOOR AND THE GEAR BOX HOUSING CRACKED
I NOW WANT TO SELL THE SAID MINI AND I AM NOT REALLY SURE WEAR TO START I
ONLY WANT ?250 FOR IT AND IT HAS A BODY KIT WORTH MORE THAN THAT PLS ...

Mini Sprite 1.3 - 1993 L Reg
Is this unleaded, the V5 doc just stated 'Petrol'.
And anybody have any idea how much a full respray would cost?
Cheers,

Hello can anyone tell me the exact location of the Mini show at
Wolverhampton which is on this Sunday 31st August?  I am coming from
Stafford.
Thanks,

Does anyone know what the front wheel camber angle should be on a 1998
Mini Cooper? (My Haynes manual doesn't have the info.)
Roger.

does anyone know about these arches and if they are suitable for use with
10"
wheels? they are the mini sport "Superior Glass Fibre Arches - Black"
the ones under the sportspack on this page: