| Thread | Last Post | Replies |
|
| Cleaning up Cosmic alloys | 19 Dec 2003 20:51 GMT | 12 |
Hallo all, Looking for advice on how to tidy up some Cosmic alloys. 2 that have obviously been on the front of the last car have a couple of nasty dents (but not enough to allow air to escape or cause tyre
|
| valve clearances | 19 Dec 2003 20:01 GMT | 5 |
Can anyone tell me what the valve clearances should be on 1300 innocewnti cooper export (12g940 head). Static ignition timing? Also i'm selling a webber carb and a kart engine , anybody know a good
|
| v-angled head? | 19 Dec 2003 17:37 GMT | 3 |
Hello all out in Mini Newsgroup land, new to the area, not new to Minis. My question is this, I saw an early Mini, a '64 Cooper "S" at a local race, it's a Canadian racer, VARAC legal, racing at this past year's Pittsburgh Vintage Grand Prix. Don't get TOO excited if you attend the ...
|
| Fuel Guage Problem | 19 Dec 2003 17:16 GMT | 7 |
The fuel gauge on my 1980 1275GT isn't working. The sender unit is new and it does not read even when the sender wires are linked. The temp gauge is still working and all the wires on the back of the clocks appear to be pushed in. Before I mess about changing clocks is there ...
|
| Battery Problem on my Mini Sidewalk | 18 Dec 2003 13:14 GMT | 19 |
I am having a problem with my Mini Sidewalk. I bought the car last year in July and so far the battery has drained completely on several occasions. So far the car has had 6 new batteries .... and there seems to be no end. When I first bought it there was a problem
|
| Indicator fault-Please help! | 18 Dec 2003 01:30 GMT | 11 |
Hi Group I have an intermittent fault with Norris, my '86 Mayfair. My Indicators have stopped working (again), as has my rear de-mister, headlamp flasher and stereo.
|
| WTB: seat mounts USA | 17 Dec 2003 15:16 GMT | 5 |
I'm looking for a set of the mounting brackets that bolt to the floor and to which the seat frames bolt. I'm in California. If you have some, please contact me directly if possible: ris@schenkerdesign.com. Thx
|
| Battery Charging Problem on 2000 Cooper Sport | 17 Dec 2003 14:51 GMT | 15 |
OK here's the problem... The battery started to go flat after a week or so of daily use. I replaced the battery but it continued to happen. I then took the car to my local garage and they checked the obvious earth straps, etc and had the alternator
|
| Driving test in Mini? | 17 Dec 2003 07:54 GMT | 9 |
Just considering putting in for my driving test in my Mini 25, and was wondering if anyone has any opinions on being examined in a mini (in UK). The 25 has headrests, left wing mirror, etc, so it passes all the criteria, but I've been learning to drive in a modern car and the
|
| Mini World No1 | 16 Dec 2003 21:19 GMT | 4 |
Hi people, I'm an ex Mini parts retailer and repairer, used to trade as "The Mini Health Centre" and I have copy of the first issue of "Mini World" as well as many others. If any one is interested in acquiring it then e-mail me at
|
| Mini won't start | 16 Dec 2003 21:15 GMT | 1 |
Turns over weakly, like if the battery were flat. Battery isn't flat so i have assumed it's poor earthing. Any ideas how to sort this out.. i did do a google search but didn't turn much up.
|
| Fuse box problem | 16 Dec 2003 18:05 GMT | 9 |
I am having lots of bad connection problems in the fusebox on a Rover Mini Sidewalk 1995, its not blowing fuses, it constantly needs the fuses cleaning, I have removed the fusebox and all the fuses, cleaned all the terminals,
|
| Subframe Replacement | 16 Dec 2003 16:59 GMT | 10 |
I have a 91 mayfair and skidded on standing water lastnight and ended up skidding sideways into a kerb. This has buckled the subframe and slightly bent the floor. Does anyone have an idea of a reasonable price for repair? it is in a local garage at the moment and they will give me ...
|
| Cooper Sport oil temperature gauge? | 16 Dec 2003 04:04 GMT | 4 |
Just about everyone who sits in the passenger seat of my 1998 Cooper Sport, looking at the beautiful walnut dash and all the pretty little gauges, comments "Why doesn't the oil temperature gauge move?" In fact it does move, slightly - if I drive for half an hour or so at a
|
| Head gasket | 15 Dec 2003 19:08 GMT | 2 |
just a quick question Which way do you put a head gasket on, copper side up or tin side up? Thanks Bob
|