Does anyone known if or how you can disable the immobiliser on a mini (1997
mini cooper sport) using the EKA code like you can on other rovers? On my
rover 400, which uses the same type of key fob you insert the key in the
door

I just bought my first Mini, yesterday. It's an old 1979 Mini 1000
(LHD). It's been sitting since 2001, and the engine hasn't been turned
over since then, either. (around 80,000KM on the clock, )
Can anyone give me any advice as to what to do with the engine? Could I

I own a 1992 rover mini mayfair automatic catalyst 998cc carb.
1) on "hard" accleration, the second gear is engaged a few seconds or
not enaged at all (and skips from 1st to 3rd).
2) At high rpms transmission slips from 3rd to D, does not slip at low rpm,

Just bought latest copy of Mini World, advertised a sticker within, but no
sticker!
Checked the other mags there and there were no stickers there either!
Today went to another shop and the same story.

Right Its Time!
Its time to start on my project car, Ive decided im gonna have a dabble at
building a Vtec Powered Mini.
Ive had a look at lots of articles from various sources, has anyone done

Guys,
I have a 1961 MK1 Mini with a floor mounted starter switch. Went out this
morning and flicked the key, and there was diddle squat. Normally you can
hear the electric pump doing it's thing and the ignition light comes on.

Anyone know what the thread size of the the bleed nipples are on a cooper S
front brake caliper?
Steve.

I NEED FINANCIAL HELP AND YOU CAN EARN MONEY - PLEASE READ !!!
http://money.mario-kaess.de
Hello,
my my name is Mario Kaess. I'm writing you, because

Found in my garage 2 mini radius arm repair kits. One is completely
un-opened, the other has the bag inside the box open, but I have
checked and all parts are present.
I think they cost about £10 or £15 each when new, so say £15 the pair?

Hi Group,
I am in the process of re-building my 1983 Mini City E which has been
standing for the best part of 5 years. Recently I overhauled the brakes
replacing the shoes etc. as well as one wheel cylinder that had been

looking for a MINI CALENDAR for 2004 any one seen one yet ?
--
Rocky
-----

I had to replace a bent driveshaft on my Mini Clubman 1979 with Metro Disks.
The one that I have got as a replacement is too long. ( I think it must be a
Metro's).  I just cannot get the hub back on.
Does anyone know the correct length so I can get a replacement ?