Hello, ive been lurking for a while, so far ive found this group to be very
helpful in teaching me about Mini's. I have a question to ask, Im fiarly new
to cars, and have very little knowledge about them, so please bear with me.
I own a Morris Mini Classic 1965, and my engine blew ...

May you put Wec Lec (it's a product that claims to stop oil leaks) in a A
serie's ? We used it on other cars but never in my mini and now with 19 000
km (I think that must be around 14 000 miles) it started to leak (maybe it's
her age (from 1996) that makes her drop a tear. I don't ...

Hi Steve R and R
I have just noticed ,,, your on the entry list,,
http://www.minimadmerseyside.co.uk/2004_entry_list.htm
see you soon

My '98 Cooper Sport has an oil leak from the crankshaft oil seal. I've
been ignoring it, because it's only slight, but my wife is determined to
have the drive block-paved, and insists that she doesn't want a slightly
incontinent Mini blobbing on it...

Here's a stumper.  I have a strange noise in the front end; it's not really
a vibration, just a WOH...WOH...WOH noise with a frequency that matches the
rotation of the tires, in or out of gear, engine off or on.
It sounds a bit like a propeller airplane drone, only it matches the ...

Peugeot 405 td LX estate,
XUD9TE  engine, with a Lucas Pump
I need some info regarding the pump setup,
email me if you can help

Is there ant Miniclubs around the NW of UK, especially around the Wigan
area?

My K reg Cooper 1.3i's fuel pump stopped working.  A friend had a look at it
but couldn't find the problem however he did wire it straight to the battery
and the pump works.  Now it's wired directly to the battery with a switch
installed.

can anyone recommend a flywheel puller tool, not expensive but reliable,
have Verto clutch to change, would prefer one for both types of clutch just
in case!
---

Front Subframe, with hydrogas displacers and upper arms, nothing else on it,
hard rust free, painted blue, very good condition for old used sub.
?30
email - barspeed@hotmail.com

I need to buy LCB's for my mini this week and I'm wondering if there's any
benefit in paying extra for a well known brand of LCB's (such as maniflow)
or if well made budget ones are just as good. It will only be used for the
road and occasional track-days, not a race car.

The turnsignal switch on my steering column won't flip off when I turn
the corner. I was looking in the Haynes manual for this on how to adjust
it -- but don't see anything.
Do I need replace the whole switch or is there a trigger screw to

Would anyone be able to tell me the size of the nuts to fit the standard
bumper to the mini. I've been through a box of odd nuts in  garage to no
avail. The nuts didn't come with the bumper which was annoying!
Cheers

Hi boys and girls
for all those who wondered where I'd gone...well Im back, switched my ISP
and it took me a while to figure out how to reconfigure the news group
settings...

I bought my third classic Mini tonight and this is the one I have been
searching for.
1961 Austin Mini, first sold in California, always been in the California
dessert hence pretty rot free, floor start switch, external hinges, sliding