Dave a mate of mine at my local Mini Club has just invested in an X reg Mini
Cooper Sport and very nice it is too, the only problem is the horn doesn't
work.  The horn does sound when the alarm is activated though but as it's a
late model it has the two little horn pushes on the ...

Need to finally get my 65 deluxe sorted out so I can get my blue slip. Can
someone point me to a decent mini based garage or whatever in Sydney who can
tackle everything from wiring to, if needed, panel replacement etc.
Thanks!

Does anyone know if I can put the Front Vrakes off a Metro Turbo onto a
Mini.
The set I have are four pot calipers with vented discs.
Would they work?

I have the following items lying around in my garage,
2 x Austin 1300 GT engine blocks (12G 1279 I think)
2 x Cranks - 12G 1505 A - I believe they have the 1.75 journals and are EN16
1 x Cylinder Head 12G940 (possibly 'S' as it is totally flat around the

I want to buy an oldtimer mini but I want to tune it up. I m searching for
software for pc to make a model of how the car is going to be. can anyone
help me with this? thanks

yo all
any mini thirty owners out there know the mesurements for where the decals go
on the bodywork.
thanks

If you were preparing to put a worked motor into a bodyshell that you
had spent ages doing up, would you go with the inboard pot joints that
are already there or would you go to the effort of finding hardy
spicer joints and shafts?

Good afternoon!
My mini (1300 injection, 1993) drinks 1 liter fuel in 12 kilometers. Isn't
that too much? I just use it for travelling work-home vv, and drive
carefully. Maximum speed is 80 km per hour.

hi anyone use the minifinity forums?  uk site?
well I do and I have not been able to connect for 4 days!
have you had problems connecting? please let me know
cheers mark.

OK, I'm about to do some bodywork on the ol' Mini.  Typical stuff:  inner
sill, outter sill, floor pan (unless the "extended outter sill" can cover
it) and jacking point.
However, I also need to do the hinge / "A" panel, as they are no longer

Can anyone help in the identification of a fart noise i have on my twin
point.
I have just put an avonbar extra hard engine steady bush kit on the car, at
the same time i needed to take off the air filter box and the odd hose to

Hi mate
any joy with the seatbelts - need em for sunday dude.....
Your email wasn`t working when i tried it earlier
Ed

I'm trying to convert my drums to discs, so I bought a pair of second hand
discs that I needed to recondition.  while changing out the discs and pads
and brakes hoses, the caliper pistons got so close together that I can't get
the pads around the discs.  what's the correct way to ...

FOR SALE:
1975 Mini Moke Californian.
Bright Yellow.
Excellent Condition, currently reg'd.

Has anyone else had the same problem as me fitting new solid front subframe
mounts where the hole don't and completely refuse to line up without a lot
of swearing? LOL