hey guys i'm still around just never get time to post busy busy busy
but if i am around i normaly use www.ausmini.com
makka

I have 2 problems that someone might be able to help me with.  the first is
that I just finished changing my front drums to discs and 10"wheels to 12".
now I noticed that the rear driver side wheel is slightly crooked/leaning.
the top part of the wheel is leaning outward from the ...

Hi - what's the recieved wisdom about the best way to run Minis on
unleaded fuel?  Mine has just got running again after a number of years
and I can't quite remember how we had it set up - I think we were using
96 unleaded with slightly hotter plugs than stock.  Does that sound

Can anyone help with a local source of flat,pancake,K&N, other more
freeflowing type air filters to fit a std 1.5 SU carb. on my 1275 HLE
Clubman?
All my search attempts for products mentioned on this group have

hey there ppl
on earlie 850's they had a metal cheak strap instead of the useual seatbelt
material has anyone out there got any or know someone who has i need them
for my 63 850 which i am doing up any help would be greatly appreciated

Any one else going on the Minifinity Leeds - Blackpool charity run?
All being well I'll be joining at Liverpool Albert Dock and then on to
Southport I think taking in the wonderful sights of Preston and the like on
the way.

I have a mid-70's Rover-type dash with the center ashtray that rotates out.
I replaced it awhile ago with an LED digital clock, but it looked a little
cheesy, and also washed out in the sunlight.  I removed it this week,
putting a quartz analog-style clock in one of the instrument ...

FS:  Mini Mayfair 998 (Wedgewood Blue).  1990 G Reg.  No Tax or MOT but
drives v. well.  Requires new rear s/frame and offside wheel arch panel to
be replaced.  Rust in the usual places.  Pictures available soon.
Offers Anyone?

Ive got one of these carbs for my 1275 mini and was wondering if any
of you lot had any experience of them?
Mainly I was wondering roughly what size jets I should have for a
MG1275 engine.

Having just had a heart attack from the price I was told for the work on my
engine head, I thought it prudent to ask in here if the work done to the
head was necessary. I took the head (well my mate did due to dodgy hours at
work) into an engineering firm to have the head skimmed. ...

When I imported my Mini last year, it came with a locking gas cap...which I
discovered even the best lock shop could not duplicate the key for.  Not
needing a locking cap, and not wanting to lose the only key and get locked
out of my gas tank, I bought a nice cap (a Stant 11623) ...