Hi you guys, I own a 55 oval window bug with chop top and porsche rear end
twin transaxle frubengravenfelzenkopfs.  The problem is that I attempted a 1
handed adjustment of the tri-headlight transmision whatsits and discovered
that the combustion internation on the forward and rear ...

A general question here: I can buy a 1996 Balmoral 1.3 mini of somebody and
was wondering:
Are all of the engines injection (I think it has the original engine) on
this model.

Dear group members,
Last january I bought a nightfire red Mini Kensington 1.3SPi,
much to my happiness too!
I just wonder why I don't see much of this edition around.

I'm looking for a set of headlight buckets and trim rings,  If anyone has
some they would part with in the GTA
Thanks James K

Anyone know where I can get my Garrett turbo reconditioned in the south
east.Cheers

does anyone know of any good garages near Cambridge or in Newmarket that
might specialise in minis?

Hi all I  posted a wee bit ago and my site was killed I got a bit of one up
with Cogeco. I put some pic's of the mini I just picked up to get back into
shape,  also I  just picked up  2 new rover front fenders,  the front mouth
panel, used hood  and 2 new bumpers  the body parts ...

I need to obtain some gas and a regulator for a small mig set i recently
purchased to carry out some work on our mini.
Can anyone tell me a good place to buy?
thanks

The hole that takes bolt & lock nut under the "clutch arm" by the
slave cylinder appears stripped.
Can I tap this to an oversize and use a thicker bolt and nut?
If yes, any things to consider? Shavings entering the housing, etc.?

Not too sure that i should be posting this, but here goes as it may
stop someone else from also embarrassing themselves.
Order of events.
engine overheating.

I have read that use of unleaded fuel is acceptable if the valve seats have
had metal inserts installed, and that the inserts started being installed at
some point in 1989.
There is a list of engine s/n's posted, that will help me identify whether

Gents, some help if you would be so kind.
I borrowed a friends year old Mini Cooper S for nearly a month and I have to
say that I really didn't want to give it back, compared to my 3-series BMW
which I've always loved, it was a breath of fresh air! He said that I might

I need to replace the motor in the near-side door mirror of my (new-style)
mini.
Is there a correct way to remove the actual mirror? (the mirror is heated)
The motor appears to be secured by 4 bolts which have an unusual head. Are

I recently took our open classic for MOT and had an interesting conversation
with the guy who tested it (a long time mini fan).  The car has a cat but is
tested as a non cat car because of its age (1992).
Apparently when cats were first becoming the rage Rover jumped on the

Does anyone have a strip & rebuild diagram for a 1275 "A" series metro
gearbox,
My Mate has locked his gearbox in 4th gear,,
he said ,, there was a clonk, and a judder,, and it went in to 4th but wont