At what angle should spots be positioned? Not so much a precise angle but
more a general ida of how far down (or up) they should be pointing.
Ta as ever.

I have been clearing out my garage and have come across some Mini parts.
Is it acceptable to list them in this newsgroup to sell them.
Thanks,

can someone tell me where the the accelerator and choke cables go on an hs4
carb.  which one goes to the big spring?

I have tried the sender wire to earth but there is no response, does this
mean a faulty guage or is there a fuse, relay of something i can try before
taking the instrument cluster apart.
cheers

2 questions.
1) Before hacking the firewall if its the wrong thing to do, please
advise or relate experiences w.r.t. installing a pancake air filter
upright between the std SU carb. and the firewall.

I can get hold of a 1977 mini clubman for a couple of hundred. All of the
bodywork is sound and it has had a good respray. Until a few years ago it
was used as a general runaround and has about 50000 on the clock. The owner
then had it resprayed but it has sat there for the past few ...

This is the nasty Ontario Mini I picked up and am about to start sorry my
web page is down as I quit my job I had it running from lol.  I  have to get
it back up so I can just put links.
look at the pic need I say more

1995 single point injection 1275cc Sidewalk,
the relay module has started acting up,,, and knocking the pump out,,
it has 4 relays inside the plastic unit, according to the Haynes book
1) starter relay

Those that know me also know that I've been recurving and rebuilding
Lucas, Hitachi and Bosch distributors for use in Mini engines. Well,
over the last few months I have been working with a company developing
a brand new CNC machined drop-in distributor for Mini engines. The

Help!
My Mini has the Australian Lucas 29D4 distributor. Can anyone tell me where
tune-up parts (cap, rotor, points and condenser are still available for
them? I understand that most repair parts are unavailable but that service

I just noticed the temp guage on our 92 open classic is not working.  The
haynes manual doesn't appear to mention it (unless i missed it).
I looked on the thermostat housing where i expected to find the sender unit
but it just has a couple of vacuum pipes.

Once I have fixed my front donuts, any opinions on fitting Gp6 arches and
chrome trim with my 5.5/12's 165/60/12's
Jon
---

I would like to sell my italian mini before going back to Italy. Here
are the details:
Mini British Open 1.3 i 1996, racing green, left hand drive, 78,000
km, good condition, electric sunroof, alloy wheels, CD player/radio,

I'm a novice with cars and I had to change the head gasket on my 78 austin
mini with an HS4 carb.  which meant that I had to take the carb off.  in the
process of taking it off the hose with the spring on the jet came out of the
float chamber without the nut being unscrewed.  my ...