Does anyone know the best way to drain the old coolant from a 1989 998 Mini
engine No. 99HE20...? There doesn't appear to be a drain plug below the
manifold like there was on earlier engines.

Ok here we go: 1991 mayfair 75.000 miles, newly fitted and balanced
tyres, new balljoints on both sides, new bearings on both sides
(front), new tie rod & lower arm bushes, just done the tracking,
recently fitted new disc brakes and pads, good ride height. All this

Just bought a nice play mini/maniflow system for my friends 1994 SPi
cooper and I'm after a bit of advice.
Having a look at where the front pipe meets the manifold, the three
bolts to the manifold look rediculosly inaccessible. When i've done

Ok, so i have had enough of it!
Free to a good home, Mini Clubman shell, in good condition, needs a front
end and some rear end work.
Rolling shell, i have most of the fittings etc.

mini diesel one de luxe
anno 03/2004
colore blu 32000km
15000 euro

Should a mini clubman, not an estate, 1100 1980 have dry or hydro
suspension? Also what type of front brakes are standard?

How do I identify what size weller wheels are?  They say 500 x 10 x 11 on
them but does that have anything to do with it.  They have tyres on which
makes measuring them difficult.  I need to know the width urgently.  They
are definitely 10"...

        I am planning to have some repair work done on my beloved
Rover Mini Equinox (charcoal). Unfortunately when I went to a body
repair workshop I was told that the decals will have to come off in
the process. As I would like to give the little fella his identity

Just picking your minds in case I forgot something.
I have a Rover Mini Icon 1991.
Came with a set of steel wheels, which look at a bit boring so I bought a
second hand set of alloy wheels. I was told that they are genuine Rover

Can anyone advise where I can get a replacement inertia reel seatbelt for a
1991 Mini Mayfair, near Manchester UK?
Also I need a replacement light switch - any ideas welcome..
JOC

hello, i have a sparkrite electronic ignition on my 1978 mini clubman.
the problem comes when i try to turn over the car, the car cranks once
and stops, no longer drawing power from the battery. after my last
attempt to get it to crank, the electronic ignition unit no longer

Can anyone advise where I could get a Front Passenger Seat belt for a 1991
Mini Mayfair in Manchester UK.
Also I need a main light switch. Any advice welcome.

I plan to replace the nearside wing and a panel on our mini, any tips
greatly appreciated.
All my body repair experience was on Mk 1 escorts (in my youth) so this is
new to me.  The welding is not a problem (its my living) but tips on the

Anyone know of a site that shows the mods needed to fit a mg metro turbo
engine to a mini.I think i have all the parts just need a bit more tech info
to make a start.Cheers in advance.Mark

have put an excellent little mini auto on ebay
needs wing, A-panel, tie bar & steering rack
have a look
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4532856696