Does any one out there know a reliable welder/mechanic?
My pride and joy is still waiting my attention for some patches to the sill
and boot,as well as radius arm repairs.
I'm running out of time to get the work completed and the MOT done before

When fitting a HIF44 from an MG Metro should it go in without any mods to
the bulkhead?
I am using the MG manifold and mine doesn't fit.
The bulkhead will have to be cut to get it in and I am worried that the

Does any one out there know a reliable welder/mechanic?
My pride and joy is still waiting my attention for some patches to the sill
and boot,as well as radius arm repairs.
I'm running out of time to get the work completed and the MOT done before

Hey Readers - I'm looking for your opinions again please.
My '89 Mayfair requires a new clutch.  I've been quoted 4 hours by the
garage and I wondered if there was anything else that could be done easier
while the clutch is out - in other words, should I go for an 'engine-out'

My mechanic tells me that as an alternative to fitting a lumpier cam in my
1275cc Moke, I can put in a set of high ratio rockers.  Any experience out
there.
GrahamL

I have a 1993 Mini which the windscreen wipers will not switch off.
Sometimes they do but normally I have to knock the wiper leaver when
the blades are in the park position to stop them.
Does anyone know what is the problem?

Have just replaced the starter solenoid on my MK1 Cooper 998.  Prior to
replacing it, I had plenty of juice in the battery (headlights working,
ignition circuit live etc.), but the starter motor wouldn't turn on the key.
Having just replaced the solenoid with an original Lucas (I ...

I have a question I would love for someone to have a stab at before I
tear this motor out.
I have recently transplanted a running engine into my 72 mini, and now
when I try and fire it up I get nothing. The trouble is, when I first

I'd be interested to know what owners of high performance A-series
engined road Minis recommend as to what engine oil to use.
I've just had a 1380 road engine built which I'm still running in.
I don't really know what oil to use:-

Any ideas on how much a respray should cost me for a yellow city e
(resprayed the same colour) in the north wales area.
has had a little bump and needs new door and sill so thought i'd get a full
respray while i'am at it.