I need to fit a new exhaust to our British Open Classic, and I want to keep
the standard manifold, but remove the cat. I found an RC40 kit on
ebay...please can anyone tell me what extra bits I will need to delete the
cat?

Can anyone give me a clue how the above goes together / works please?
I stripped the car about 4 years ago (I know...) and boxed everything.
I even took pictures of most things - but not the underside of the slam
panel.

Hiya
Is there anyone out there at the moment that still does one if these?
I know the ones that fitted in the standard box were not such a good
idea, but I thought Jack knight did a different casing?

Any tips on removing the side windows of the non opening type ?
At the moment I have the idea of washing up liquid and a small
screwdriver but thought I'd ask here incase anyone has any better ideas.
I take it to get them back in is the piece of string around the seal and

Hey I found a cheap little injector for a water injection system, Try a
0.5mm mig welder tip most have a M5 thread so you can drill them into
your manifold and tap them with no problems and they are easily
available!

Has anyone had problems MOTing their minis with grp frontends on? I
have a solid mounted subframe but have been told by two mot testers so
far that it is dangerous because the front of the sub frame isnt
supported properly, they don't seem to realise that the subframe

Help - one of the little spring hinges on my 1990 Mini mayfair's opening
rear window has worn/rusted thru.
Can anyone help - where could I get a replacement window? Or fix it somehow?
I am in Manchester UK...

Hi, Anyone got any advice as to how to cure the problem of the engine over
running when you turn off the ignition and remove the key?  Standard 998
1986 Mayfair.
Cheers

Help!!
My reverse lights aren't working. The switch works, the bulbs are ok, but
there is no power at the switch. Can anybody tell me where the feed comes
from to the switch on the gear change mechanism?

It may be worth filling up your tank now, there may be fuel blockades in the
uk next week, I have just been to get some petrol  here in Liverpool & the
panic buying has already started, I saw one guy with jerry cans in his boot
to, fill up now & avoid a possible rush!

Chaps,
I'm beginning to tune my Mini, and I'm trying to find an insurance company
who will recognise the basic stages of tune with the Mini, I.E. Stage 1 kit,
etc. All the insurers I've spoken to seem to only be interested in the

I've got me new clutch (sadly my brilliant and friendly stockist
http://www.heritagegarage.com was out of lightened flywheel due to no fault
of there's. The chap that ships out of UK went on vacation -  where is this
Mans priorities I daresay - lol), adjustable lower arms and ...

Hi again-well thanks for the help on the last posts ,touch wood car still
runnin fine and indicators sorted(it was a dodgy bulb holder!) but i recently
"won" a new rad on ebay. It brand spankin new and states on the box that its
to suit all minis from 59-96.However, i noticed that ...

Can anyone tell me the location of the inline fuse for the interior
light on a 1991 mini city.
Any help will be greatly appreciated.
Neil

well back on the road but now got probl;em with indicators. lhs front doesnt
light but bulb fine.,also side and rear lhs do flash but at a fast speed ,rhs
functions fine and when i switch my hazards on all is good apart from the
front lhs is still off but rest flash at normal speed ...